Abstract:The results of studies on thermodynamics of martensitic transformation in Fe-C and Fe-X-C alloys lead the Ms temperature in structural steels to be predicted. Establishing thermodynamics of martensitic transformation in Cu- and Fe-Mn-Si based alloys built the basis of composition and processing design for Cu- and Fe- based shape memory alloys. The thermodynamic approach for calculation of Ms in ZrO2 containing ceramics and corrected formula expressing the effect of parent grain size on Ms were suggested. The revised kinetics equation of a thermal martensitic transformation shows that alloying element varying the diffusion coefficient of carbon in low-carbon steels would affect the amount of the retained austenite and it will be beneficial for the exploitation of steels with microstructure of lath martensite. Research on the isothermal kinetics of the retained austenite→martensite in GCrl5 ball bearing (AISI 52 100) steel indicates that the dimensional stability (as comparison to specimen treated by traditioinal quenching and tempering) increases 34％ in specimen treated by an isothermal holding in order to form a few percent of isothermal martensite from the retained austenite after quenching and followed by normal tempering and the contact fatigue life is not reduced. Studies of characteristics of martensitic transformations and their reverse transformations in Ni-Ti, Cu-Zn-Al, Fe-Mn-Si based alloys and ZrO2 containing ceramics reveal the factors affecting the shape memory effect (SME) and indicate the way to improve the SME as well as the exploitation of these materials. Thermodynamics study of bainitic transformation, observation of the growth ledge, studies on the effect of parent strengthening on transformations and the results of internal friction measurements all display that the bainite formation is controlled by diffusion. Addition of alloying elements hindering the diffusion of Zn and Al in Cu-Zn-Al may improve the SME and its service life. There exists the hainitic transformatioin in CeO2-ZrO2 and it relates to the appearance of brittleness in ZrO2 containing ceramics. Research on the ordering of β phase in Cu-Zn is significant for the application of alloy with ordered phase. The presentation of the criterion of spinodal decomposition in ternary alloys may be valuable for the development of alloys exhibiting high damping capacity or high strength by means of spinodal decomposition. Group theory is successfully utilized in crystallography of phase transformation. The required condition for the appearance of crystallography reversibility derived from group theory is the formation of single variant martensite. It seems effective that the soliton is introduced in the nucleation and growth model in phase transformation.

Studies on pre-bainitic transformation in CuZnAlMn alloy

The pre-bainitic transformation in CuZnAlMn alloy

On the Prebainitic Phenomenon in Some Alloys

Study on Bainitic Transformation by Dilatometer and in Situ LSCM

On mechanism underlying pure bainitic transformation

Scanning tunnelling microscopy and transmission electron microscopy study of ultrafine structure and surface relief of bainite in a Cu–Zn–Al alloy

In Situ Observation On The Effects Of Prior Martensite Formation On Nanostructured Low-Temperature Bainite Transformation

Growth kinetics and high-temperature tem in situ observation of bainite in a Cu-Zn alloy

Study of Stabilization of CuAlBe Alloy During Martensitic Transformation by Internal Friction

The Time-Temperature Transformation Diagram Concerning Pure Bainite Formation in A Cu-Zn Alloy

The internal friction of the pearlitic, bainitic and martensitic transformations in FeNiC alloys

Nucleation Mechanism for Bainite

THE BAINITE TRANSFORMATION IN Fe-C ALLOY CONTAINING Si AND Mn

Microstructure and Phase Transformation of Ni46Mn33Ga17Cu4−xZrx Alloys

INTERNAL FRICTION OF Ag-Cd ALLOY IN THE BAINITIC TRANSFORMATION

Study on the formation mechanism of bainite

A TEM Study on Thermally-Induced Martensitic Transformation in Ti44Ni47Nb9 Alloy

Studies on Phase Transformations and Their Applications in Materials Engineering

THE BEHAVIOR OF INTERNAL FRICTION ASSOCIATED WITH THE PROCESS OF MARTENSITE-TYPE TRANSFORMATION

On Bainite Transformation Kinetics and Mechanism

Research on bainite transformation in steels