Abstract:Clock gating is a popular technique for reducing power dissipation in clock network. Although there have been numerous research efforts on clock gating, the previous approaches still have a significant weakness. That is, they usually construct a gated clock tree after cell placement, i.e., cell placement is performed without considering clock gating and may generate a solution unfriendly to subsequent gated clock tree construction. As a result, the control gates inserted in the tree construction is very likely to cause cell overlap. Even though the overlap can be eventually removed in placement legalization, remarkable wirelength/power overhead is incurred. In this paper, we propose a gate planning technique which is integrated with a partition-based cell placer. During cell placement, the planning judiciously inserts clock gates based on power estimation. In addition, pseudo edges are inserted between clock gates and registers in order to reduce clock wirelength and enable long shut-off periods. At the end, when a relatively detailed placement is obtained, a post-processing is performed to degrade the inefficient clock gates to clock buffers. We compared our approach with recent previous works on ISCAS89 benchmark circuits. Our method reduces the clock tree wirelength and power by 22.06% and 40.80%, respectively, with a very limited increase on signal nets wirelength and power compared with the conventional (register-oblivious) placement. The results also indicate that our algorithm outperforms the clock-gating-oblivious placement [9] on power reduction and performance improvement.

A method of automatically tuning gate length and width in a standard cell

A Fast OPC Algorithm for IC Layout Based on 1-D Cells after Optimization of Gap Distribution

Variation-aware gate sizing and clustering for post-silicon optimized circuits.

A novel layout automation flow to facilitate test chip design for standard cell characterization

AutoCellLibX: Automated Standard Cell Library Extension Based on Pattern Mining

Migrating Standard Cells for Multiple Drive Strengths by Routing Imitation

Standard Cell Library Evaluation with Multiple lithography-compliant verification and Improved Synopsys Pin Access Checking Utility

A standard-cell placement algorithm of optimizing multiple objects

An Automated System for Checking Lithography Friendliness of Standard Cells

Fame: A Fast Detailed Placement Algorithm For Standard-Cell Layout Based On Mixed Mincut And Enumeration

Self-Aligned Double Patterning Friendly Configuration for Standard Cell Library Considering Placement

Efficient Aging-Aware Standard Cell Library Characterization Based on Sensitivity Analysis

Large Language Model (LLM) for Standard Cell Layout Design Optimization

Design for Manufacturability of Sub-100 Nanometer Standard Cells

Optimization for Cell Arrangement Design of Gate-Commutated Thyristors Based on Whole Wafer Model and Tabu Search

ECOP:A Row-Partition Based Incremental Placement Algorithm for Standard Cell Layout Design

An Efficient EPIST Algorithm for Global Placement with Non-Integer Multiple-Height Cells

Gate Planning During Placement for Gated Clock Network

A Multi-Step Standard-Cell Placement Algorithm of Optimizing Timing and Congestion Behavior

Impact Study of Layout-Dependent Effects Toward FinFET Combinational Standard Cell Optimization

A new DFM flow for sub-loonm standard cells