Abstract:Transition metal oxides (TMOs), such as tin dioxide (SnO 2 )-based materials, are claimed to be one of the most interesting classes of solids, exhibiting varieties of properties, structures and applications. TMOs have been attracting growing research attention due to their characteristic properties such as plentiful active sites, the high theoretical capacity and diverse reaction mechanisms. Herein, the optimal condition for fabricating SnO 2 -carbon nanotube (SnO 2 /CNTs) nanohybrids using the atmospheric pressure chemical vapor deposition and thermal growth process has been described. As well as, the SnO 2 thin film was exposed to the functionalized multiwalled carbon nanotubes (F-MWCNTs) via solution mixing for thermal growth process. The effect of essential parameters on optical and morphological properties of thin films was optimized. According to the results, the conditions in which the nanohybrid films had the best quality are as follows: 300 °C re-heating temperature, DMSO solvent, and 6 mg amount of FMWCNTs. Absorption and reflection modes of UV/Vis spectroscopy detected the peak changes of the fabricated films in each stage and confirmed their crystal structure. Furthermore, the crystal structure and atomic composition of the SnO 2 -carbon nanotubes films were analyzed to assess surface properties of the thin films by scanning electron microscopy and by X-ray diffraction (EDX), respectively. This new synthetic method suggested a facile means to produce SnO 2 /MWCNT thin films with the aim of using it to fabricate the gas sensors.

Coating of Multi-Walled Carbon Nanotubes with Sno2 Films of Controlled Thickness

Coating Single-Walled Carbon Nanotubes with Tin Oxide

Coating of multi-walled carbon nanotube with SnO2 films of controlled thickness and its application for Li-ion battery

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

Transferable thin films of pristine carbon nanotubes.

Synthesis of Tin (II or IV) Oxide Coated Multiwall Carbon Nanotubes with Controlled Morphology

Coating Multi-Walled Carbon Nanotubes with Uniform Silica Shells: Independent of Surface Chemistry

Study on the Coating and Superficial Modification of Multi-wall Carbon Nanotubes by MnO2

Coating carbon nanotubes with polymer in supercritical carbon dioxide.

Structural Variation and Water Adsorption of a SnO2 Coated Carbon Nanotube: a Nanoscale Chemical Imaging Study

Carbon Nanotubes Coated with Tubular MoS2 Layers Prepared by Hydrothermal Reaction

In Situ Coating Carbon Nanotubes with Wurtzite ZnS Nanocrystals

Continuous Ni-layer on Multiwall Carbon Nanotubes by an Electroless Plating Method

Coating Multi-Walled Carbon Nanotubes with Zinc Sulfide

Homogeneous Coating of Au and Sno2 Nanocrystals on Carbon Nanotubes Via Layer-By-Layer Assembly: A New Ternary Hybrid for A Room-Temperature Co Gas Sensor

Study of Controlled Growth of Carbon Nanotubes in Microstructures at Low Temperature

Methods To Form Atomically Thin Carbon Coatings On Sns And Sno2 Nanostructures

Controlled Growth of Composite Nanowires Based on Coating Ni on Carbon Nanotubes by Electrochemical Deposition Method

The Effect of Multiwalled Carbon Nanotube Doping on the CO Gas Sensitivity of SnO2-based Nanomaterials

Tin Oxide Nanoparticle‐Functionalized Multi‐Walled Carbon Nanotubes by the Vapor Phase Method

Combination of chemical vapor deposition and thermal growth methods for facile synthesis of tin oxide-doped multiwalled carbon nanotubes