Abstract:The type and content of particles in the plating solution greatly affect the electrodeposition process, making it important to study the effect of carbon nanotubes (CNTs) on the electrodeposition of nickel during the preparation of CNTs/Ni composites. In this paper, cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometric analysis (CA), and electrochemical impedance spectroscopy (EIS) were adopted to study the nucleation mechanism in the early stage of electrocrystallization . Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) were used to reveal the electrocrystallization properties. The results showed that Ni was electrodeposited by 3D nucleation/growth and was controlled by diffusion and electrochemical kinetics. Increasing the CNTs concentration shortened the time required for 3D growth. Additionally, the polarizability of the electrodeposited nickel increased upon increasing the CNTs content, which helped increase the electro-crystallization probability of Ni. As the concentration of CNTs increased, the charge transfer resistance decreased, the Ni nucleation activation energy decreased, and the Ni nucleation became easier. The introduction of CNTs changed the preferred growth orientation of pure nickel, and the surface growth morphology was mainly a spiral in a stepwise pyramid.

Controlled Growth of Composite Nanowires Based on Coating Ni on Carbon Nanotubes by Electrochemical Deposition Method

Controllable Template Synthesis of Ni/Cu Nanocable and Ni Nanotube Arrays: a One-Step Coelectrodeposition and Electrochemical Etching Method.

Controllable preparation of Ni nanoparticles for catalysis of coiled carbon fibers growth.

Continuous Ni-layer on Multiwall Carbon Nanotubes by an Electroless Plating Method

Coating of Carbon Nanotube with Nickel by Electroless Plating Method

Synthesis and Growth Mechanism of Ni Nanotubes and Nanowires

Electrochemical Deposition of CoPt Nanowires and Nanotubes

Electrodeposition and Mechanical Characterization of Ni-carbon Nanotubes Composite Coatings

Fabrication and growth mechanism of Ni-filled carbon nanotubes by the catalytic method

Growth of Morphology-Controllable Carbon Nanocoils from Ni Nanoparticle Prepared by Spray-Coating Method

Synthesis of Nio-Embedded Carbon Nanotubes Using Corona Discharge Enhanced Chemical Vapor Deposition

Growth of Aligned Carbon Nanotubes with Controlled Site Density

Controlled Growth of Carbon Nanotubes on Graphite Foil by Chemical Vapor Deposition

Preparation and Characterization of Electroless Ni-P Alloy Coating on Multi-Walled Nanotubes

Highly Efficient Direct Electrodeposition of Co−Cu Alloy Nanotubes in an Anodic Alumina Template

Controlled Growth of Ni Particles on Carbon Nanotubes for Fabrication of Carbon Nanotubes

Controlled Synthesis and Magnetic Properties of Ni Nanotubes and Nanowires

The High Thickness Ni Layer on Single-Walled Carbon Nanotubes Prepared by an Electroless Coating Process

Controllable synthesis of Zn 0.95Co 0.05O nanowires and nanotubes by electrophoretic deposition method

Electrochemical co-deposition of carbon nanotube/Ni composite layer

Fabrication Of Multi-Walled Carbon Nanotubes/Nickel Nano-Composite Films By Electrochemical Processing