Abstract:Thermally conductive but electrically insulating polymer composites have drawn much attention in various applications including thermal management, electronic packing, etc. Herein, a facile method of preparing polymer composites with both excellent thermal conductivity and electrical insulation is reported. To do this, nylon 6 (PA6)/Graphene nanoplatelets (GNPs) composites were firstly prepared via melt blending, then smashed into micron particles and coated with hexagonal boron nitride (h-BN) powder via VAE resin, finally hot compress molding to form composites. Thus depending on the content of GNPs inside PA6 particles and the content of h-BN coated on the particles, the thermal and electrical conductivity of the composites could be well controlled. For instance, at the total content of fillers is 18.82 vol%, with 1.97 vol% GNPs insides PA particles and 16.85 vol% h-BN coated on the surface, almost ten times improvement of thermal conductivity (from 0.29 to 2.69 W m−1k−1) has been achieved, while still maintain an excellent electrical insulating (as low as 4.13 × 10−9 S/m). It is proposed that this double segregated filler network could provide synergistic enhancement for the thermal conductivity, while the electrical conductivity caused by GNPs could be largely cut off by h-BN filler network. More importantly, this unique structure could be well preserved even after the sample thickness was decreased into a thin film, resulting in a further increase of thermal conductivity (up to 8.96 W m−1k−1) in the flow direction. Since various thermoplastic polymers can be chosen as matrix, and different filler combination can be adopted to construct thermal conductive synergistic and electrical insulating, we believe that this work provides a facial method to fabricate highly thermally conductive composites with a low electrical conductivity.

Preparation and Properties of Nylon 12 Thermally and Electrically Conductive Composites

Electric Conductivity and Thermorheology Properties of Polyacrylonitrile/Nylon6 Composites Filled with Carbon Black

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Selective laser sintering of polyamide 12 composites

Preparation and Research of Thermally Conductive PBT/CF Composites

Mechanical Properties Of Stainless Steel Fiber/Carbon Nanotube Filled Nylon Conductive Composites

3D Printing Processability of a Thermally Conductive Compound Based on Carbon Nanofiller-Modified Thermoplastic Polyamide 12

Preparation and Characterization of Nylon-6/Carbon Nanotubes Composites by Co-precipitation Process

Preparation of highly thermally conductive but electrically insulating composites by constructing a segregated double network in polymer composites

Preparing CNT/UHMWPE Composite and It’s Electrical Property Study

High Strength Conductive Polyamide 6 Nanocomposites Reinforced by Prebuilt Three-Dimensional Carbon Nanotube Networks.

Thermal conductive nylon 6 composites using hybrid fillers to construct a three‐dimensional thermal conductive network

Conductive Nylon-Mxd6 Composites Prepared by Melt Compounding Associated with Formation of Carbon Black-Covered PET Domains Serving As Big Conductive Particles

Aqueous solution‐assisted in‐situ polymerization for fabrication of BNNS/PA12T nanocomposites with excellent thermal conductivity and mechanical properties

Thermal Conductive Nylon 6 Composites with Hybrid Fillers Prepared Through Reaction During Extrusion

Preparation and Properties of Polypropylene/Graphite Composites with High Thermal Conductivity

Properties of Polymer Composites Reinforced by Self-welded Carbon Fiber Networks

RESEARCH ON ELECTRICAL PROPERTIES OF PA6/CNTs COMPOSITES

Improved Thermal Conductivity of Ceramic Filler‐filled Polyamide Composites by Using PA6/PA66 1:1 Blend As Matrix

Thermally Stable, Conductive and Flame-Retardant Nylon 612 Composites Created by Adding Two-Dimensional Alumina Platelets