Abstract:Segregated conductive polymer composites exhibit excellent electrical properties with a low percolation threshold. However, the mechanical properties of the segregated conductive polymer composites were always poor because the conductive fillers at the interfaces hinder polymer chain diffusion and thus lead to weak interfacial interaction between the conductive fillers and the polymer matrix. In this paper, polyamide-6 and polyamide-612 microspheres were synthesized via the in situ anionic ring opening of caprolactam and laurolactam. Segregated graphite sheets/polyamide-6(GS/PA6) and polyamide-612(PA612) composites with good mechanical properties were realized via high-pressure solid-phase compression molding. The microstructures of the composite samples were observed by scanning electron microscopy, which showed that the formation of a GS-conductive network at the PA6 granule interfaces in the segregated conductive structures and the adopting of PA612 considerably improved the interfacial adhesion of the composites. A superior impact strength of 5.1 kJ/m2 was achieved with 50 wt% PA612 loading owing to improvements in the interface compatibility between PA6 and GS. The composites possessed an ultralow percolation threshold, which was ascribed to the segregated network structure being successfully constructed inside the material. As for GS/PA6 composites, the combination of segregated GS-conductive networks achieved an ultralow percolation of 2.8 vol%. The percolation of 80PA6/20PA612-GS composites was slightly higher, measuring up to 3.2 vol%. Moreover, the thermal conductivity of the 80PA6/20PA612-GS composites increased from 0.26 to around 0.5 W/(m·K), which was 1.9 times larger than the pure polyamide.

Conductive Nylon-Mxd6 Composites Prepared by Melt Compounding Associated with Formation of Carbon Black-Covered PET Domains Serving As Big Conductive Particles

Electric Conductivity and Thermorheology Properties of Polyacrylonitrile/Nylon6 Composites Filled with Carbon Black

Liquid Crystalline Pet/60hba-Mwnts Composite: Synthesis, Characterization, and Properties

Conductive polycarbonate composites prepared by a ternary polymer blend approach involving sea‐island‐type interfacial carbon black networks

Preparation Of Conductive Polyphenylene Sulfide/Polyamide 6/Multiwalled Carbon Nanotube Composites Using The Slow Migration Rate Of Multiwalled Carbon Nanotubes From Polyphenylene Sulfide To Polyamide 6

Low Percolation Thresholds of Electrical Conductivity and Rheology in Poly(Ethylene Terephthalate) Through the Networks of Multi-Walled Carbon Nanotubes

Morphology and electrical properties of polypropylene/polyamide 6/glass fiber composites with low carbon black loading

Preparation of Conductive Polyester Fiber Compounded with Carbon Black

Poly(ethylene Terephthalate)/carbon Black Composite Fibers Prepared by Electrospinning

Improved electrical conductivity of polymer/carbon black composites by simultaneous dispersion and interaction-induced network assembly

Improved Electrical Conductivity of TPU/carbon Black Composites by Addition of COPA and Selective Localization of Carbon Black at the Interface of Sea-Island Structured Polymer Blends.

Conductivity of PLA/PBAT blends with carbon black as a conductive filler

Highly Efficient Electrically Conductive Networks in Carbon‐black‐filled Ternary Blends Through the Formation of Thermodynamically Induced Self‐assembled Hierarchical Structures

Selective Localization of Carbon Black in Bio-Based Poly (Lactic Acid)/Recycled High-Density Polyethylene Co-Continuous Blends to Design Electrical Conductive Composites with a Low Percolation Threshold

Comparison of Three Interfacial Conductive Networks Formed in Carbon Black-Filled PA6/PBT Blends

Thermodynamically induced self-assembled electrically conductive networks in carbon-black-filled ternary polymer blends

Electrical conductivities of carbon nanotube-filled polycarbonate/polyester blends

Morphology and physical properties of composites based on high-density polyethylene/propylene-ethylene random copolymers blends and carbon black

Development of the Conductive Polymer Matrix Composite with Low Concentration of the Conductive Filler

Microstructure and Properties of Poly(butylene Terephthalate)/poly(ethylene Terephthalate) Composites Based on Carbon Nanotubes/graphene Nanoplatelets Hybrid Filler Systems

Enhanced Mechanical Property of Polyamide-6/Graphite Sheet Composites with Segregated 3D Network Binary Structure for High Thermal Conductivity