Abstract:Toughening with little rigidity loss was achieved by adding high density polyethylene (HDPE) into polypropylene/ethylene-propylene random copolymer (PP/EPR) blends to fabricate a series of PP/EPR/HDPE ternary blends with core–shell dispersed particles. Morphology observations revealed that the addition of HDPE leads to the appearance of core–shell dispersed particles in PP matrix, i.e., HDPE core encapsulated in EPR shell. Dynamic mechanical analysis results showed that the introduction of HDPE could increase glass transition temperature (Tg) and loss factor peak area of EPR in PP/EPR/HDPE blends, which is similar to the effect of adding EPR in PP/EPR. The shrinkage behavior results suggested that the increase of glass transition temperature of EPR was induced by the mismatch of thermal expansion coefficients of components and the larger peak area was ascribed to the stronger relaxation friction of EPR. According to percolation of stress volumes, the interparticle distance was proposed to be a key factor of toughening effect of rubber particles in thermoplastic and thereby a toughening mechanism about the equivalent rubber content was established to explain balanced toughness-strength improvement of PP/EPR/HDPE blends with core–shell particles. The rubber particles with core–shell structure lead to the increase of particle size and the decrease of interparticle distance on the premise of not increasing actual rubber content, resulting in a notable improvement of toughness, while the ‘hard’ core made from HDPE component provides a satisfied rigidity.

Study on Synergistic Toughening Polypropylene by Combining of β-nucleating Agent and Ethylene-octene Copolymer Elastomer

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Effect of Nucleating Agent on the Structure and Properties of Polypropylene/Poly(Ethylene-Octene) Blends

Synergistic toughening of polypropylene with ultra-high molecular weight polyethylene and elastomer-olefin block copolymers

Synergistic Toughening Effect of Olefin Block Copolymer and Highly Effective Β-Nucleating Agent on the Low-Temperature Toughness of Polypropylene Random Copolymer

Study on synergistic toughening of polypropylene with high-density polyethylene and elastomer-olefin block copolymers under ultrasonic application

Synergistic Toughening of Iso‐polypropylene with High‐density Polyethylene and Polycyclooctene Synthesized by ROMP

Synergistic toughening effects of elastomer toughener and nucleating agent on mechanical properties and crystallization behaviors of polypropylene

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Balanced toughening and strengthening of ethylene–propylene rubber toughened isotactic polypropylene using a poly(styrene-b-ethylene–propylene) diblock copolymer

Recent Progress in Toughening Polypropylene

Toughening with Little Rigidity Loss and Mechanism for Modified Polypropylene by Polymer Particles with Core–shell Structure

The effect of elastomeric nano-particles on the mechanical properties and crystallization behavior of polypropylene

Toughening Mechanism of Polypropylene Bends with Polymer Particles in Core-Shell Structure: Equivalent Rubber Content Effect Related to Core-Shell Interfacial Strength

Toughening of Polypropylene by Combined Rubber System of Ultrafine Full-Vulcanized Powdered Rubber and SBS

Toughening Polypropylene with Nanoscale Rubber Particles

Effectively toughening polypropylene with in situ formation of core-shell starch-based particles

Research Progress in the Toughening and Strengthening of Polypropylene Via Inorganic Rigid Particles

Structure And Mechanical Properties Controlling Of Elastomer Modified Polypropylene By Compounded Beta/Alpha Nucleating Agents