Abstract:In the present study, by adopting the advantage of ultrasonic techniques, we developed a Multichannel Pulsed Ultrasonic Doppler Velocimetry (MPUDV) to measure the 2D2C velocity fields of liquid metal flow. Due to the specially designed Ultrasonic host and post-processing scheme, the MPUDV system can reach a high spatiotemporal resolution of 50 Hz and 3 mm. The flow loop contains a cavity test section to ensure a classical recirculating flow was built to validate the accuracy of MPUDV in velocity field measurement. In the initial phase of the study, water with tracer particles was selected as the working liquid to ensure the velocity field measurements by the well-developed Particle Image Velocimetry (PIV). A comparison of the data obtained from the PIV and MPUDV methods revealed less than 3 differences in the 2D2C velocity field between the two techniques during simultaneous measurements of the same flow field. This finding strongly demonstrates the reliability of the MPUDV method developed in this paper. Moreover, the ternary alloy GaInSn was selected as the working liquid in the flow loop to validate the efficacy of the MPUDV in measuring 2D-2C velocity fields. A series of tests were conducted in the cavity at varying Reynolds numbers, ranging from 9103 to 24123. The measurements demonstrated that the MPUDV could accurately measure the flow structures characterized by a central primary circulation eddy and two secondary eddies in the opaque liquid metal. Furthermore, it was found that the vortex center of the primary circulating eddy and the size of the secondary eddies undergo significant alterations with varying Reynolds numbers, indicating the influence of inertial force on the flow characteristics in the recirculating flow. It is therefore demonstrated that the current MPUDV methodology is applicable for measuring a 2D2C velocity field in opaque liquid metal flows.

Improvement of the flow rate distribution in quench tank by measurement and computer simulation

Computational Fluid Dynamics Simulation of Hydrodynamics in an Uncovered Unbaffled Tank Agitated by Pitched Blade Turbines

Numerical Study on Performances of Mini-Channel Heat Sinks with Non-Uniform Inlets

Two-phase Flow Oscillation and Distribution in Parallel Channels During R1233zd(E) Subcooled Flow Boiling: A Numerical Study

Optimization design of structure of bottom spray quenching tank

Numerical Simulation of Flow Field and Configuration Optimization of a Reciprocating Baffled Flocculation Tank

Research on the Cooling Characteristic and Heat Transfer Coefficient of Dynamic Quenchant

CFD method for the effect of baffle locations and baffle lengths on the hydraulic characteristics of a horizontal sedimentation tank

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Virtual Design of Integrated Bottom Head Quenching Scheme

Optimum Design of Flow Distribution in Quenching Tank for Heat Treatment of A357 Aluminum Alloy Large Complicated Thin-Wall Workpieces by CFD Simulation and ANN Approach

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

CFD-Aided Investigation of Combined Flow Conditioners for Gas Ultrasonic Flow Meter

Flow Field Research of the Reciprocating Baffled

Flow Field Research of the Reciprocating Baffled Flocculation Tank

Experimental and Numerical Analysis of a Novel Flow Conditioner for Accuracy Improvement of Ultrasonic Gas Flowmeters

Improved mixing of solid suspensions in stirred tanks with interface baffles: CFD simulation and experimental validation

Numerical study of liquid sloshing in 3D LNG tanks with unequal baffle height allocation schemes

Two-Dimensional LDV Measurement, Modeling, and Optimal Design of Rectangular Primary Settling Tanks

Development of the Multichannel Pulsed Ultrasonic Doppler Velocimeter for the measurement of liquid metal flow

DPIV MEASUREMENT AND CFD SIMULATION OF VISCOUS FLUID FLOW IN STIRRED TANK AGITATED BY RUSHTON TURBINE