Effect of Alloying Elements on Thermal Wear of Cast Hot-Forging Die Steels

Shu-qi Wang,Kang-min Chen,Xiang-hong Cui,Qi-chuan Jiang,Bian Hong

DOI: https://doi.org/10.1016/s1006-706x(06)60095-2

2006-01-01

Abstract:The effect of main alloying elements on thermal wear of cast hot-forging die steels was studied. The wear mechanism was discussed. The results show that alloying elements have significant influences on the thermal wear of cast hot-forging die steels. The wear rates decrease with an increase in chromium content from 3% to 4% and molybdenum content from 2 % to 3 %, respectively. With further increase of chromium and molybdenum contents, chromium slightly reduces the wear resistance and molybdenum severely deteriorates the wear resistance with high wear rate. Lower vanadium/carbon ratio (1. 5–2. 5) leads to a lower wear resistance with higher wear rate. With an increase in vanadium/carbon ratio, the wear resistance of the cast steel substantially increases. When vanadium/cartion ratio is 3, the wear rate reaches the lowest value. The predominant mechanism of thermal wear of cast hot-forging die steels are oxidation wear and fatigue delamination. The Fe 2 O 3 and Fe 3 O 4 or lumps of brittle wear debris are formed on the wear surface.