Abstract:Conductive and thermal conductive polymer composites have significant advantages in corrosion resistance and mechanical and processing properties. To improve the integrity of the network structure of the conductive filler in a polypropylene (PP) matrix, PP@Graphite (Gr) with segregated single-network structure, PP@(carbon nanotubes (CNTs)/Gr) with segregated double-network structure, and (x wt%-CNTs/PP)@Gr with segregated hybrid double-network structure were prepared by the Pickering emulsion method. The original irregular powder was converted into spherical shape by the Pickering emulsion method. Among these composites, the (2 wt%-CNTs/PP)@Gr composite had the highest conductivity and thermal conductivity. The electrical and thermal conductivity of the (2 wt%-CNTs/PP)@Gr composite reached 1.45 S/m and 0.82 W/m·K, respectively, at a Gr loading of 13.01 wt%, and the electrical conductivity was 3 and 0.5 times higher than that of PP@Gr and PP@(CNTs/Gr) composites, respectively. The CNTs acted as "bridges" to form a denser conductive network, and significantly improved the conductivity. The interfacial thermal resistance of the (2 wt%-CNTs/PP)@Gr composite was between 1.5 × 10-7 and 1 × 10-6 m2K/W according to the effective medium theory (EMT) fitting results. Additionally, the crystalline peaks of the PP@Gr and PP@(CNTs/Gr) composites showed a significant left shift, while the (2%-CNT/PP)@Gr composite showed a significant right shift, which indicated that the hybridization of CNTs with Gr caused a "bridge effect" and increased the thermal conductivity. This method provides a convenient and time-saving new approach for the study of segregated structural thermally conductive composites by encapsulating the filler on the matrix through a one-step process while meeting the requirements of green environment.

Structure and Properties of Polypropylene‐wrapped Carbon Nanotubes Composite

Preparation of Isotactic Polypropylene-Grafted Multiwalled Carbon Nanotubes (Ipp-G-mwnts) by Macroradical Addition in Solution and the Properties of Ipp-G-Mwnts/Ipp Composites

Mechanical Properties and Biocompatibility of Functionalized Carbon Nanotubes/polypropylene Composites

Polymer Nanocomposite Based on Pyrolyzed Polyacrylonitrile Doped with Carbon Nanotubes: Synthesis, Properties, and Mechanism of Formation

Preparation of CNTs/PP@Gr composites with a segregated structure and enhanced electrical and thermal conductive properties by the Pickering emulsion method

Flame-retardant-wrapped Carbon Nanotubes for Simultaneously Improving the Flame Retardancy and Mechanical Properties of Polypropylene

Carbon nanotube/polypropylene/polycarbonate conductive nanocomposite films: Preparation and characterization

Research Development of Preparation and Characterization of Polypropylene/Carbon Nano-tube Composites

Facile Fabrication of Polyolefin/Carbon Nanotube Composites Via in Situ Friedel-Crafts Polyalkylation: Structure and Properties

Effect of Carbon Nanotube on Thermal, Tribological and Mechanical Properties of 3D Printing Polyphenylene Sulfide

The effects of carbon nanotubes selective location on the structures and properties of polyphenylene sulfide/polyamide 66 fibers

Preparation and Characterization of Novel Polyethylene/carbon Nanotubes Nanocomposites with Core–shell Structure

Relationship Between Microstructure Evolution and Properties Enhancement of Carbon Nanotubes‐filled Polybutylene Terephthalate/polypropylene Blends Induced by Thermal Annealing

Electrical Resistivity, Crystallization and Mechanical Properties of Polypropylene/Multi-Walled Carbon Nanotube/Calcium Carbonate Composites Prepared by Melt Mixing

Improved Dielectric Performance of Polypropylene/ Multiwalled Carbon Nanotube Nanocomposites by Solid-Phase Orientation

Effect of hydroxyl and carboxyl-functionalized carbon nanotubes on phase morphology, mechanical and dielectric properties of poly(lactide)/poly(butylene adipate-co-terephthalate) composites

Electrical Property of Carbon Nanotubes/polyphenylacetylene Composites

Fabrication of Multiwalled Carbon Nanotube/Polypropylene Conductive Fibrous Membranes by Melt Electrospinning

Comparative study on the electrical, thermal, and mechanical properties of multiwalled carbon nanotubes filled polypropylene and polyamide 6 micromoldings

Biobased Poly(1,3-propylene 2,5-furandicarboxylate)-Carbon Nanotubes Nanocomposites with Enhanced Thermal, Mechanical Properties and Crystallization Behavior

Multi-walled carbon nanotube reinforcement in polypropylene nanocomposites: comprehensive analysis of thermal behavior, mechanical properties, and dispersion characteristics