Abstract:The formation of water-conducting fractures in overlying strata caused by underground coal mining not only leads to roof water inrush disasters, but also water-conducting fractures penetrate the aquifer, resulting in the occurrence of a mine-water-inrush disaster and the loss of water resources. It destroys the sustainability of surface water and underground aquifers. This phenomenon is particularly significant in extra-thick coal seams and fault-bearing areas. Numerical simulation is an effective method to predict the failure range of mining overburden rock with low cost and high efficiency. The key to its accuracy lies in a reasonable constitutive model and simulation program. In this study, considering that the three parts of penetrating cracks, non-penetrating cracks, and intact rock blocks are often formed after rock failure, the contact state criterion and shear friction relationship of discrete rock blocks and the mixed fracture displacement–damage–load relationship are established, respectively. Combined with the Mohr–Coulomb criterion, the constitutive model of mining rock mass deformation–discrete block motion and interaction is formed. On this basis, according to the engineering geological conditions of Yushupo Coal Mine, a numerical model for the development of water-conducting cracks in the roof with faults under repeated mining of extra-thick coal seams is established. The results show the following: The constitutive relation of the continuous deformation–discrete block interaction of overlying strata and the corresponding finite element–discrete element FDEM numerical program and VUSDFLD multi-coal seam continuous mining subroutine can numerically realize the formation process of faults and water flowing fractures in overlying strata under continuous mining of extra-thick multi-coal seams. The toughness of sand mudstone is low, and the fracture will be further developed under the repeated disturbance of multi-thick coal seam mining. Finally, it is stabilized at 216–226 m, and the ratio of fracture height to mining thickness is 14.1. When the working face advances to the fault, the stress concentration occurs in the fault and its overlying rock, which leads to the local fracture of the roof rock mass and the formation of cracks. The fault group makes this phenomenon more obvious. The results have been preliminarily applied and tested in Ningwu mining area, which provides theoretical support for further development of roof water disaster control under the condition of an extra-thick coal seam and avoids the loss of water resources in surface water and underground aquifers.

A New Algorithm of Building Coal Seam TIN Considering Reverse Faults

Triangulated irregular network based chunk gridding algorithm for terrain rendering

Automatic Generation And Dynamic Modification Of Triangulated Surfaces And Pentahedral Meshes. Application To 3d Modeling Of Stratified Geological Volumes

3D geological fine modeling and dynamic updating method of fault slope in open-pit coal mine

The Algorithm Study of 3D Modeling the Complicated Geological Body Containing Cross-bedded Faults

Boolean Algorithm on 3D Models Based on TIN and Implementation on 3D Geological Modeling

Fine structure exploration and 3D quantitative evaluation model

A Front Advancing Adaptive Triangular Mesh Dynamic Generation Algorithm and Its Application in 3D Geological Modeling

Study on Optimization of Waterproof Coal Pillar in High Angle Normal Fault Floor

The method for precise seismic detection of geological structures in underground coal mines and application

Study on Cross Main Tunnel Mining Next to Large Fault Structure

Drawing Fa?ade Projection Map of Steep-Inclined Coal Seam

A numerical simulation technique to study fault activation characteristics during mining between fault bundles

Finite–Discrete Element Method Simulation Study on Development of Water-Conducting Fractures in Fault-Bearing Roof under Repeated Mining of Extra-Thick Coal Seams

Theory and methodology of a new, GIS based coal mine information system

Research on the surface subsidence characteristics and prediction models caused by coal mining under the reverse fault

Study on the Spatiotemporal Dynamic Evolution Law of a Deep Thick Hard Roof and Coal Seam

Research on a coal seam modeling construction method based on improved kriging interpolation

Finite–Discrete Element Method Prediction of Advanced Fractures in Extra-Thick Coal Seams Based on a Constitutive Model of Rock Deformation–Fragmentation Failure Process

Dynamic correction of coal mine three-dimensional geological model

Support Control Design of Mining Roadway under Goaf of Close-Distance Coal Seam