Abstract:In this paper, the fretting wear behaviour of steel wires working in coal mining technology is studied numerically. In past studies, the fretting process of steel wires was carried out numerically considering that the coefficient of friction (COF) and wear coefficient (WC) are constant parameters. However, it has been noticed experimentally that COF increases up to a certain number of fretting cycles and then becomes constant, i.e. a steady-state stage, depending on the loading conditions. This increase in COF during the fretting process is also known as the running-up stage. The fretting wear model is modified to evaluate the influence of the varying coefficient of friction (VCOF), which is associated with the variable wear coefficient (VWC), so the influence of VWC is also considered. The subroutine UMESHMOTION used to implement the wear law is also modified to study the effect of VCOF and VWC. Therefore, in this study, the numerical results of a three-dimensional finite element (FE) model are compared, with analytical results of contact area and contact stresses, and with experimental results of peak wear depth. After validating the FE model, the wear scar, the increasing wear depth, wear volume, and the decreasing contact stress with increasing fretting cycles are determined numerically considering VCOF and VWC using cycle jump approach. The energy dissipation effect of frictional force and fretting amplitude is also studied for varying interaction properties of fretting wear models. The numerical simulations are performed by considering both elastic and plastic material properties to analyse the influence of varying interaction properties on fretting wear models at the running-up stage. The results indicate that the VWC model exhibits comparable impacts on both the elastic and plastic models. The results also show that the VWC fretting wear model leads to higher wear scar, wear volume, and wear depth values at the running-up stage as well as at the steady state stage, which are close to the experimental data.

Evaluation of fretting wear based on the frictional work and cyclic saturation concepts

Modeling of Fretting Wear Based on Cumulative Plastic Strain and Saturated Shear Stress

Finite element analysis of fretting wear considering variable coefficient of friction

Finite Element Simulation of Fretting Wear Behaviors under the Ball-on-flat Contact Configuration

Coupling Fractal Model for Fretting Wear on Rough Contact Surfaces

A computationally efficient method for the prediction of fretting wear in practical engineering applications

Simulation of fretting wear in steel wires under variable coefficient of friction and variable wear coefficient

+Fretting wear: A phenomological approach

Evaluation of Cyclic Inelastic Response in Fretting Based on Unified Chaboche Model

Fracture Mechanics Assessment of Stress Concentrations in Incomplete Fretting Contacts

A damage mechanics approach to fretting fatigue life prediction with consideration of elastic–plastic damage model and wear

Modification methodology of fretting wear in involute spline

The role of plastic anisotropy deformation in fretting wear predictions

An Investigation on Fretting Fatigue Mechanism under Complex Cyclic Loading Conditions

Fretting Wear Of Bolted Joint Interfaces

An Efficient Numerical Model for Predicting the Torsional Fretting Wear Considering Real Rough Surface

Study of fretting wear mechanisms of complete contacts

Friction Assessment in Uniaxial Compression Test: A New Evaluation Method Based on Local Bulge Profile

Experimental and numerical study on the fretting wear-fatigue interaction evolution in press-fitted axles

Modeling adhesive and abrasive wear phenomena in fretting interfaces: A multiphysics approach coupling friction energy, third body and contact oxygenation concepts

Fracture mechanics approach to fretting fatigue and problems to be solved