Abstract:The development of high performance metal matrix composites (MMCs) requires understanding the complex effects of heterogeneous microstructure on the mechanical properties and failure mechanisms. Experimental observations [1] indicated that fine reinforcement particles increased the composite strengthen and work hardening capacity. A number of dislocation models [1,2] have been proposed in a few decades to predict the particle size dependence. Recently, Gao et al. [3] proposed a mechanism-based theory of strain gradient plasticity (MSG) to illustrate the plastic strain and strain gradient which is dissimilar to the phenomenological strain gradient plasticity theories [4,5]. Gao and Huang [6] developed a Taylor-based nonlocal theory (TNT) of plasticity to account for the size dependence of plastic deformation on the strengthening of particle reinforced composites. Qu et al. [7] have extended the conventional theory of mechanism-based strain gradient plasticity (CMSG) established from the Taylor dislocation model to explain the effect of quench hardening and account for particle/matrix interface debonding via the cohesive zone model (CZM). The numerical results agree well with Lloyd’s experimental data [1]. Nan and Clarke [8] extended the effective medium approach (EMA) to demonstrate the influence of particle size and size distribution as well as particle fracturing on the deformation behavior of MMCs. Tohgo et al. [9] extended the incremental damage model of the MMCs by introducing the particle size effects using Nan–Clarke’s simple method. This paper presents the development of a 2D microstructure based finite element model to investigate the effect of particle size on the deformation behavior of the SiCp/Al composites. In the simulation, the two-dimensional randomly distributed multiparticles unit cell model is used. For modeling the matrix behavior of the composites, the Taylor-based nonlocal theory of plasticity is used. The model is enhanced by including contribution of interfacial decohesion and particle fracture damage mechanisms. The simulation provides the stress–strain field of composites during tensile deformation, and calculates the stress–strain curves of the composites with different particle size. 2. NUMERICAL METHODS

Numerical analysis on the effects of particle configuration on the damage and mechanical properties of particle reinforced MMCs under dynamic compression

Novel MMC microstructure with tailored distribution of the reinforcing phase

Micromechanical Simulation on Strength and Ductility of Two Kinds of Al-based Nanostructural Materials

Numerical Simulations of the Dynamic Compressive Properties of Ceramic Particle Reinforced Metal Matrix Composites

Concurrent Multiscale Modeling of In-Plane Micro-Damage Evaluation in Z-pinned Composite Laminates

Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?

A Physically-Based Plastic Constitutive Model Considering Nanoparticle Cluster Effect for Metal Matrix Nanocomposites

Configuration effect and mechanical behavior of particle reinforced aluminum matrix composites

Microstructure-based simulation on the mechanical behavior of particle reinforced metal matrix composites with varying particle characteristics

Modeling of force and temperature in cutting of particle reinforced metal matrix composites considering particle effects

An enhanced fem model on the deformation behavior of sic / aluminum composites

Plastic deformation and fracture behaviors in particle-reinforced aluminum composites: A numerical approach using an enhanced finite element model

Damage behavior of high particle volume fraction composites with initial damage by finite element meso-modeling

A rate-dependent peridynamic model for predicting the dynamic response of particle reinforced metal matrix composites

A Review of Dynamic Mechanical Behavior and the Constitutive Models of Aluminum Matrix Composites

A numerical strength analysis of metal matrix composites considering the interface and matrix damage evolution

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

A coupled ductile damage model for metal matrix composites: Development and application

Damage Evolution in Particle Reinforced Polymers under Dynamic Loading

Analysis of Particle-Dispersed Composites Accounting Stochastically for Interfacial Damage