Effect of manufacturing new U-shaped electrode on die sinking EDM process performance
Gualtiero Fantoni Israa Dheyaa Khalaf Alrubaye Livio Baccelli a Department of Civil and Industrial Engineering,University of Pisa,Pisa,Italyb Department of Smart Industry,University of Pisa,Pisa,Italy
DOI: https://doi.org/10.1080/10910344.2024.2414263
2024-10-30
Machining Science and Technology
Abstract:Traditional electrical discharge machining (EDM) electrodes have several limitations such as long machining time, low material removal rate MRR, hazard emissions and high energy consumption. To overcome these limitations, new electrodes (plane and frame U-shaped) were manufactured considering the electrode manufacturing classifications, such as electrode flushing mechanism, electrode cross-sectional area and electrode bottom machining area. Experiments were performed on a die-sinking EDM machine using copper electrodes and aluminum alloy workpieces. The results were compared with those obtained using the conventional electrode. The newly manufactured electrodes significantly improved the EDM process performance, reducing the machining time by more than 50%, which implies a higher MRR. The reduced machining time also led to lower costs, emissions and energy consumption for efficient EDM processes. Additionally, surface roughness measurements were performed to compare the surface quality of the machined areas using different pulse-code generator systems and electrodes. The results showed an improvement in the machined surface quality when using the new electrodes in comparison with the conventional electrode when using a roughing pulse code generator system.
engineering, mechanical, manufacturing,materials science, multidisciplinary