Abstract:A CFD scheme was presented for modeling municipal solid waste (MSW) combustion in a moving-grate incinerator, including the in-bed burning of solid wastes, the out-of-bed burnout of gaseous volatiles, and the selective non-catalytic reduction (SNCR) process between urea (CO(NH2)2) and NOx. The in-bed calculations provided 2-D profiles of the gas-solid temperatures and the gas species concentrations along the bed length, which were then used as inlet conditions for the out-of-bed computations. The over-bed simulations provided the profiles of incident radiation heat flux on the top of bed. A 3-dimensional benchmark simulation was conducted with a 750 t/day commercial incinerator using the present coupling scheme incorporating with a reduced SNCR reduction mechanism. Numerical tests were performed to investigate the effects of operating parameters such as injection position, injection speed and the normalized stoichiometric ratio (NSR) on the SNCR performance. The simulation results showed that the distributions of gas velocity, temperature and NOx concentration were highly non-uniform, which made the injection position one of the most sensitive operating parameters influencing the SNCR performance of moving grate incinerators. The simulation results also showed that multi-layer injections were needed to meet the EU2000 standard, and a NSR 1.5 was suggested as a compromise of a satisfactory NOx reduction and reasonable NH3 slip rates. This work provided useful guides to the design and operation of SNCR process in moving-grate incinerators.

Simulation Study on Semi-dry Scrubber in a MSW Incineration Plant

Modeling of an MSW Incinerator

Experimental Study and Simulation of Low-Temperature Gasification of Municipal Solid Waste in Circulated Fluidized Bed

Integrated Modeling of Semi-dry Flue Gas Desulfurization

Simulation of SO2 absorption and performance enhancement of wet flue gas desulfurization system

Performance Optimization of Wet Flue Gas Desulphurization System Based on CFD Technology

CFD Simulation with Enhancement Factor of Sulfur Dioxide Absorption in the Spray Scrubber

MODEL TEST AND NUMERICAL ANALYSIS OF FLOW FIELD IN SCR DENITRIFICATION SYSTEM IN SECOND-PHASE PROJECT OF SANHE POWER PLANT

CFD simulation and optimization of flow field and SO2 absorption in impinging stream scrubber

Numerical simulation and intelligent prediction of a 500 t/d municipal solid waste incinerator

CFD Simulation of Flow Field,temperature Field and SO2 Absorption in Flue Gas Quench Tower

Integrated Gas and Solid Model to Determine the Flow Performance in the SCR Reactor

CFD simulation of MSW combustion and SNCR in a commercial incinerator

Comprehensive Assessment and Optimization of a Middle-Arch Dual-Channel Municipal Solid Waste Incinerator Using Numerical Simulation Methods

Study on Drying and Combustion Process in Grate-Cfb Incinerator

Three-dimensional Monte-Carlo Modeling of Radiative Transfer in a Municipal Solid Waste Incinerator

Experimental study on influence of multi-stage humidification on semi-dry flue gas desulfurization

STUDY ON EFFECTS OF A WET SCRUBBER UPON CONTROLLING THE PAHS EMISSIONS

Simulation of Municipal Solid Waste Gasification for Syngas Production in Fixed Bed Reactors

The Experiment Research On Original Pollutant Emission From Grate And Fluidized Bed Incinerator Fired Msw

Experimental Study on Performance of Wet Scrubber on Dioxins Emission from a MSW Incinerator