Abstract:Synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films. Polyvinyl alcohol (PVA) is a widely used polymer that is biocompatible, nontoxic, and water‐soluble due to the presence of hydroxyl groups in its domain. This study aims to investigate the effects of fumaric acid (FA) cross‐linking and thermal cross‐linking (TC) on the PVA's mechanical and thermal properties. When the FA is mixed with PVA, it was found in the chemical reaction that the OH groups of PVA are condensing with the carboxylic acid units of FA to yield new ester linkages and water as a by‐product, which further results in the reduction of the water absorption capacity. Quantitatively, the addition of 8 (wt. /wt. %) FA resulted in a minimum of 65% water absorption rate, as compared with 117% for pure PVA. The mechanical and thermal properties of PVA also enhanced with the addition of 2% to 8% FA by weight. For the TC case, the % increase in ultimate tensile strength was 30.9% and 42.5% with and without TC, respectively. As the wt. % of FA increased from 2 to 10%, the % elongation value decreased for both with and without TC films relative to pure PVA. The thermogravimetric analysis revealed the change in degradation temperature of FA‐PVA blended film in comparison with pure PVA. Dynamic mechanical analysis was utilized to analyze the viscoelastic nature and temperature variation at the glass transition temperature. The current fabricated film is a potential candidate for the food packaging films application; moreover, the results reported in this investigation will accelerate the industrial applications of biodegradable PVA. Highlights Increasing the weight percentage of fumaric acid leads to an enhancement in mechanical and thermal properties of the film. Esterification is the usual reaction between fumaric acid and polyvinyl alcohol (PVA), in which ester linkages are formed when the carboxyl groups (‐COOH) of fumaric acid and the hydroxyl groups (‐OH) of PVA combine. Water absorption characteristics of the film reduces as the wt. % of fumaric acid increases. Thermal cross‐linking of the film leads to further improvements in mechanical and thermal properties. The overall effect of increasing the wt. % of fumaric acid is negative on the glass transition temperature of the film. The developed film is a potential candidate for the food packaging films application.

High Strength Bio-Composite Films of Poly(vinyl Alcohol) Reinforced with Chemically Modified-Fly Ash

High-Intensity Ultrasonication Modification of Vapor Grown Carbon Fibers with Poly(Vinyl Alcohol) for the Preparation of High Strength Composites by Simple Water Casting

Transforming fly ash into value: Sustainable LLDPE-fly ash composites via rotational molding

Effects of Inorganic‐organic Surface Modification on the Mechanical and Thermal Properties of Poly(vinyl Chloride) Composites Reinforced with Fly‐ash

Influence of fly ash filler on the mechanical properties and water absorption behaviour of epoxy polymer composites reinforced with pineapple leaf fibre for biomedical applications

Surface modification of purified fly ash and application in polymer

Effect of banana, pineapple and coir fly ash filled with hybrid fiber epoxy based composites for mechanical and morphological study

Preparation and mechanism of fly ash based composite fillers with different morphologies and its application in filling polyamide 6

Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites

Mechanical, Thermal, and Morphological Analysis of Himalayan Agave Fiber /GO Coated Fly Ash Hybrid Polypropylene Composites

Synthesis and Characterization of Cellulose Microfibril-Reinforced Polyvinyl Alcohol Biodegradable Composites

Wood fly ash and blast furnace slag management by alkali-activation: Trace elements solidification and composite application

Fabrication and characterization of polyvinyl alcohol/biowaste cashew nut shells powder-based hybrid biocomposite films

Fly Ash-Linear Low Density Polyethylene Composites for Rotational Molding: Morphological and Thermal Analysis

Strong, flexible and UV-shielding composite polyvinyl alcohol films with wood cellulose skeleton and lignin nanoparticles

Bio-modification and application of coal fly ash in cementitious composites

Physical, Mechanical, and Tribological Properties of Industrial Waste Fly Ash Reinforced AA5083 Composites Fabricated by Stir Casting Process

Experimental synthesis and characterization of PVA‐fumaric acid cross‐linked biodegradable films: Implications as a sustainable matrix for composites

Evaluation of polylactic acid polymer composites strengthened with chopped vetiver fiber and pearl millet-derived- nano silica towards environmental sustainability

High Strength UV-Resistant Composite Film of Fe3+-Coordination Lignin/PVA

Properties of polyvinyl alcohol films reinforced by citric acid modified cellulose nanocrystals and silica aerogels