Abstract:Recent advances in the field of composite materials, aligning them with cost-effectiveness and environmental sustainability, have made the development of materials from industrial waste an attractive area of research. This work introduces an innovative approach for the reuse of globally available industrial waste by hybridizing organic and inorganic by-products to create low-cost composite materials with synergistically enhanced performances. Herein, industrial wastes, namely powdered wood chips (PWC) from the woodworking industry and fly ash (FA) derived from bagasse burning, were incorporated in a thermoplastic polypropylene (PP). Hybrid PP/PWC/FA composites at 70/20/10, 70/15/15 and 70/10/20 wt% were manufactured via extrusion process, followed by injection molding. Micrographic observations and infrared spectroscopy reveal that PWC particles have good physical adherence with PP. In contrast, the hydrophilic nature of FA leads to the creation of gaps at the interface due to the poor interfacial adhesion. The latter difference is reflected in the combined void nucleation modes of particle–fracture and particles–matrix interface decohesion during hybrid composites' tensile deformation. This provides a good synergistic stiffening effect for 70/20/10 wt% PP/PWC/FA hybrid composite, which offers the highest Young's modulus improvement of about 44.43%, while benefiting from balanced tensile strength and strain at yield. Furthermore, a two-way ANOVA at a significance level of 5% also proved the significant effect of PWC and FA reinforcement on the tensile parameters, as the p -values were below 0.05. Melt rheological properties demonstrate complex viscosity decrement for hybrid composites, suggesting a reduction in the energy required during production. Overall, the novel, high-performance hybrid composites developed can be manufactured with less energy consumption and are suitable for applications requiring high-temperature resistance and stiffness such as automotive, construction, and beyond.

Fly Ash-Linear Low Density Polyethylene Composites for Rotational Molding: Morphological and Thermal Analysis

Transforming fly ash into value: Sustainable LLDPE-fly ash composites via rotational molding

Experimental Investigation on Underlying Mechanism of LLDPE Based Rotationally Molded BioComposites

Effect of Fiber Content on Mechanical and Morphological Properties of Bamboo Fiber-Reinforced Linear Low-Density Polyethylene Processed by Rotational Molding

The mechanics of extruded polylactic acid: An investigation into the effects of its multiple recycling and the inclusion of fly ash

Analysis of the Impact of Waste Fly Ash on Changes in the Structure and Thermal Properties of the Produced Recycled Materials Based on Polyethylene

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites

Preparation and mechanism of fly ash based composite fillers with different morphologies and its application in filling polyamide 6

Rotational Molding of Linear Low-Density Polyethylene Composites Filled with Wheat Bran

Mechanical, Thermal, and Morphological Analysis of Himalayan Agave Fiber /GO Coated Fly Ash Hybrid Polypropylene Composites

Mechanical Properties and Characterization of Polylactic Acid/Carbon Fiber Composite Fabricated by Fused Deposition Modeling

Rotational Molding of Poly(lactic acid): Effect of Polymer Grade and Granulometry

Processing characteristics and mechanical and electrical properties of chlorinated styrene–butadiene rubber/fly ash composites

Mechanical Properties of Injection Molded Poly(lactic) Acid—<i>Luffa</i> Fiber Composites

Mechanical characteristics and failure morphology of FFF-printed poly lactic acid composites reinforced with carbon fibre, graphene and MWCNTs

Development of Toughened Flax Fiber Reinforced Composites. Modification of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends by Reactive Extrusion Process

Preparation and Finite Element Analysis of Fly Ash/HDPE Composites for Large Diameter Bellows

Carbon Fiber Reinforced Recycled Polypropylene/Polyolefin Elastomer Composites with High Mechanical Properties

Influence of fly ash filler on the mechanical properties and water absorption behaviour of epoxy polymer composites reinforced with pineapple leaf fibre for biomedical applications

Evaluation of Mechanical Properties of Composite Material with a Thermoplastic Matrix Reinforced with Cellulose Acetate Microfibers