Abstract:A commercial scale Mg-7Gd-2Y-1Zn-0.5Zr alloy extrusion rod with synergetic high yield strength of 350 MPa and fracture toughness KIC of 22.4 MPa m(1/2) was fabricated by direct-chill casting, hot extrusion and subsequent aging treatment at 200 C for 108 h. The microstructures and mechanical properties of the as-extruded and peak aged alloys were investigated, and the fracture toughness and fracture mechanisms before and after aging treatment were also analyzed. The results showed that the as-extruded alloy consisted of long period stacking ordered (LPSO) phase and bimodal matrix microstructure composed of fine dynamic recrystallized (DRXed) grains and coarse deformed grains. Microstructural analysis near fracture surfaces indicted that twinning was activated in the coarse deformed grains during fracture toughness test, which may be conducive to the improvement of the fracture toughness of the alloys. The lamellar-shaped LPSO phases enhanced the fracture toughness since the formation of secondary cracks parallel to the lamellar LPSO can cause significant energy dissipation and deflection of main crack. The micro-cracks were initiated and propagated in the bulk LPSO phases, which may deteriorate the fracture toughness. Large amount of nano beta' phase precipitated in the T5 peak-aged alloy significantly improved the strength of the alloy. Fractography analysis indicated that fracture mechanism changed from ductile fracture of the as-extruded alloy to quasi-cleavage fracture of the peak-aged alloy. The precipitation of beta' would suppress twin growth and induce the microcracks initiated at the DRXed grain boundaries and in the deformed grains, which led to slight decrease of KIC.

Microstructure, Mechanical Properties and Aging Behaviors of As-Extruded Mg–5Li–3Al–2Zn–1.5Cu Alloy

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Microstructure and Mechanical Properties of an Extruded Mg-2Dy-0.5Zn Alloy

Microstructure and Mechanical Properties of a Rapidly-Solidified and Extruded Al-13.2Zn-2.5Mg −1.2Cu-0.2Zr Alloy and Its Aging Hardening Response at 120 °C

Microstructure and Mechanical Properties of Extruded Mg-Zn-Y Alloy

Evolution of the Microstructure and Mechanical Properties of Mg-10Gd-2Y-0.5Zn-0.3Zr Alloy during Extrusion and Aging Processes

Microstructure, Texture, and Mechanical Properties of As-Extruded Mg-xLi-3Al-2Zn-0.2Zr Alloys (x = 5, 7, 8, 9, 11 Wt%)

Microstructures and Mechanical Properties of Hot-extruded Mg-6Zn-xCu-0.6Zr(x=0,0.5,1.0,1.5) Alloys

Microstructure and Mechanical Properties of the Extruded Al-Cu-Mn-Sc-Zr Alloy During Single-Stage and Two-Stage Aging

Microstructure and Mechanical Properties of As-Cast and Extruded Mg–8Li–3Al–2Zn–0.5Nd Alloy

A Preliminary Study on the Effects of Aging Temperature on the Microstructure and Mechanical Properties of As-Extruded Mg-12Gd-4Y-1Zn Magnesium Alloy

Effect of heat treatments on the microstructure and mechanical properties of an extruded Mg95.5Y3Zn1.5 alloy

Microstructure and Mechanical Properties of As-Extruded and As-Aged Mg–Zn–Al–Sn Alloys

Effect of Aging Treatment on the Microstructure, Fracture Toughness and Fracture Behavior of the Extruded Mg-7Gd-2Y–1Zn-0.5Zr Alloy

Microstructures and mechanical properties of as-extruded Mg–5Sn–1Zn–xAl (x=1, 3 and 5) alloys

Microstructure and mechanical properties of Mg-Gd-Zn-Zr alloy after hot extrusion

Microstructures and mechanical properties of extruded Mg-4Nd and Mg-4Nd-0.7Zr alloys

Effect of Heat Treatment on the Microstructure and Mechanical Properties of Extruded Al–4Cu–1Li–0.4Mg–0.4Ag–0.18Zr Alloy

Effect of Aging Treatment on Microstructure and Mechanical Properties of As-Extruded AA6063 Aluminum Alloy

Microstructural evolution and mechanical properties of the rapidly-solidified and hot-extruded 2196 Al-Li alloy

Microstructure and Mechanical Behavior of Mg–10Li–3Al–2.5Sr Alloy