Abstract:Polymeric optical waveguide devices with Bragg gratings have been investigated, for implementing tunable lasers and wavelength filters used in wavelength-division-multiplexed optical communication systems. Owing to the excellent thermo-optic effect of these polymers, wavelength tuning is possible over a wide range, which is difficult to achieve using other optical materials. In this study the phase-mask technology, which has advantages over the conventional interferometeric method, was introduced to facilitate the fabrication of Bragg gratings in polymeric optical waveguide devices. An optical setup capable of fabricating multiple Bragg gratings simultaneously on a 4-inch silicon wafer was constructed, using a 442-nm laser and phase mask. During fabrication, some of the diffracted light in the phase mask was totally reflected inside the mask, which affected the quality of the Bragg grating adversely, so experiments were conducted to solve this issue. To verify grating uniformity, two types of wavelength-filtering devices were fabricated using the phase-mask lithography, and their reflection and transmission spectra were measured. From the results, we confirmed that the phase-mask method provides good uniformity, and may be applied for mass production of polymer Bragg-grating waveguide devices.

Polymeric Multi-Channel Bandpass Filters in Phase-Shifted Bragg Waveguide Gratings by Direct Electron Beam Writing

Programmable All-Fiber Structured Waveshaper Based on Linearly Chirped Fiber Bragg Grating and Digital Thermal Controller

Design of Polarization Band-Pass Filters Based on the Theory of Thin-Film Photonic Crystal Superlattice

Tunable Transmission Filters Based on Corrugated Sidewall Bragg Gratings in Polymer Waveguides

Integration of a multimode interference coupler with a corrugated sidewall Bragg grating in planar polymer waveguides

Polymeric Flat Focal Field Arrayed Waveguide Grating Using Electron-Beam Direct Writing

Polymer-waveguide Bragg-grating Devices Fabricated Using Phase-mask Lithography

Broad Bandwidth and Large Fabrication Tolerance Polarization Beam Splitter Based on Multimode Anti-Symmetric Bragg Sidewall Gratings

Inverse Design of the Multimode Bragg Grating Based on Time-Domain Layer Peeling Method

Silicon Band-Rejection and Band-Pass Filter Based on Asymmetric Bragg Sidewall Gratings in A Multimode Waveguide

A Low Loss Band-Rejection And Band-Pass Filter Based On Silicon Photonic Multimode Bragg Gratings

Polarization-insensitive Antisymmetric Multimode Waveguide Bragg Grating Filter Based on an SiN-Si Dual-Layer Stack.

Athermal Silicon Arrayed Waveguide Grating With Polymer-Filled Slot Structure

Design and Fabrication of a Polymeric Flat Focal Field Arrayed Waveguide Grating.

High-Efficiency and Polarization-Insensitive Grating Couplers on Thin-Film Lithium Niobate Waveguides

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Phase-dithered Waveguide Grating with Flat Passband and Sharp Transitions

Design of A Compact Polarizing Beam Splitter Based on A Photonic Crystal Ring Resonator with A Triangular Lattice

Vertical Coupling Between Waveguides and Optical Fibers Utilizing Polarization Gratings

Fabrication of a 17×17 Polymer Arrayed Waveguide Grating with Flat Spectral Response

Integrated Bragg gratings in spiral waveguides