Tunable Transmission Filters Based on Corrugated Sidewall Bragg Gratings in Polymer Waveguides

L Zhu,YY Huang,WMJ Green,A Yariv

DOI: https://doi.org/10.1109/cleo.2005.201752

2005-01-01

Abstract:We fabricate different bandpass filters based on polymeric waveguide gratings by introducing phase shift defects and integrating with a 3 dB MMI coupler. We also use thermo-optic effects to dynamically tune the designed filter

What problem does this paper attempt to address?

Programmable All-Fiber Structured Waveshaper Based on Linearly Chirped Fiber Bragg Grating and Digital Thermal Controller

Hailiang Zhang,Ming Tang,Yiwei Xie,Huiqi Liao,Songnian Fu,Perry Ping Shum,Deming Liu

DOI: https://doi.org/10.1007/s00340-013-5600-5

2013-01-01

Applied Physics B

Abstract:We proposed and experimentally demonstrated an all-fiber structured programmable optical bandpass filter (waveshaper) based on a linearly chirped fiber Bragg grating and a digital-controlled thermal array. The key parameters of this filter such as the number of transmission channels, passing bandwidth per channel, central wavelength as well as the channel spacing can be reconfigured independently and flexibly by a program-controlled circuit. We have achieved in experiments the tunable passing bandwidth ranging from < 0.04 to 1.55 nm, adjustable central wavelength ranging from 1,547.16 to 1,558.64 nm, and a minimum wavelength spacing of 0.91 nm. The insertion loss of the whole device and the sideband rejection ratio are about 1.76 and 28 dB, respectively.
Narrow-Band Add-Drop Filter Based on Cladding-Modulated Apodized Multimode Bragg Grating

Huiye Qiu,Lisheng Lin,Ping Yu,Tingge Dai,Xiaoqing Jiang,Hui Yu

DOI: https://doi.org/10.1109/jlt.2019.2937412

IF: 4.7

2019-01-01

Journal of Lightwave Technology

Abstract:A narrow-band add-drop filter based on an anti-symmetric cladding-modulated multimode Bragg grating (CMMBG) is demonstrated on the silicon-on-insulator (SOI) platform. The CMMBG is implemented by using periodic placements of silicon cubes along a multimode waveguide. The coupling strength is varied by changing the distance between the cubes and the multimode waveguide. An unlimited free-spectral range (FSR) and weak coupling strengths for TE0-TE1 modes conversion are achieved. Sidewall-misalignment-modulation (SMM) apodization is applied to achieve a high sidelobe suppression ratio (SLSR). The experimental results show that the designed filtering device has a 3-dB bandwidth of 0.8 nm, an insertion loss of 0.65 dB and a SLSR of 20.3 dB. The devices with different grating duty cycles and multimode waveguide widths were also fabricated and analyzed. Our devices are promising for on-chip applications that require narrow bandwidths such as WDM channel filters.
Polymeric Multi-Channel Bandpass Filters in Phase-Shifted Bragg Waveguide Gratings by Direct Electron Beam Writing

L Zhu,YY Huang,WMJ Green,A Yariv

DOI: https://doi.org/10.1364/opex.12.006372

IF: 3.8

2004-01-01

Optics Express

Abstract:We apply direct electron beam writing to fabricate corrugated sidewall Bragg gratings in polymer waveguides and demonstrate multi-channel passband filters based on a phase-shifted design. Experimental results are compared with numerical fittings to analyze the impact of signal polarization and waveguide cladding material upon device performance.
Photonic Microwave Transversal Filter Employing A Fiber-Bragg-Grating-Based Multiple Resonator

XB Yu,XM Zhang,H Chi,KS Chen

DOI: https://doi.org/10.1002/mop.20637

IF: 1.311

2005-01-01

Microwave and Optical Technology Letters

Abstract:In this paper, we present a photonic microwave transversal filter with a multiple-fiber resonator formed by cascaded fiber Bragg gratings. The filter-free spectral range is extended via the Vernier effect, which can increase the filter rejection bandwidth and suppress the unwanted periodic passbands. The experiment is demonstrated to confirm the feasibility of the proposed scheme. (C) 2005 Wiley Periodicals, Inc.
Integration of a multimode interference coupler with a corrugated sidewall Bragg grating in planar polymer waveguides

Lin Zhu,Yanyi Huang,Amnon Yariv

DOI: https://doi.org/10.1109/LPT.2006.871125

IF: 2.6

2006-01-01

IEEE Photonics Technology Letters

Abstract:We demonstrate the integration of a 3-dB multimode interference coupler with a corrugated sidewall Bragg grating in planar polymer waveguides by direct electron beam writing. Both transmission and reflection spectra of the Bragg grating are measured through this integrated device directly. We use the thermooptic effect to tune the integrated waveguide grating, achieving a tuning range of 6.2 nm an...
Silicon Band-Rejection and Band-Pass Filter Based on Asymmetric Bragg Sidewall Gratings in A Multimode Waveguide

Huiye Qiu,Jianfei Jiang,Ping Yu,Tingge Dai,Jianyi Yang,Hui Yu,Xiaoqing Jiang

DOI: https://doi.org/10.1364/ol.41.002450

2016-01-01

Abstract:A silicon photonic wire filter based on an asymmetric side-wall Bragg grating in a multimode silicon-on-insulator strip waveguide is demonstrated. The operating principle is based on the contra-directional coupling between the transverse electric fundamental (TE0) and first-order (TE1) modes, which is enabled by the asymmetric spatially periodic refractive-index perturbations. An asymmetric Y-junction is cascaded at the input port of the filter so as to drop the Bragg reflection. Compared with conventional Bragg grating-based filters, this device eliminates the back reflection at the input port and the 6 dB inherent insertion loss at the drop port; moreover, a narrow 3 dB bandwidth can be obtained with a large critical dimension as a result of the weak coupling strength between the TE0 and TE1 modes inside the multimode waveguide. Experimental results show that a bandwidth of similar to 2.8 nm is achieved by a large corrugation width of 150 nm. The insertion loss at the drop port is -2.1 dB, and the extinction ratio is -33 dB at the through port. (C) 2016 Optical Society of America
Bandpass Transmission Filters Based on Phase Shifted Fiber Bragg Gratings in Microstructured Polymer Optical Fibers

Beatriz Ortega,Rui Min,David Saez-Rodriguez,Yang Mi,Kristian Nielsen,Ole Bang

DOI: https://doi.org/10.1117/12.2268281

2017-01-01

Abstract:In this contribution we report on the fabrication of novel bandpass transmission filters based on PS-FBGs in microstructured polymer fibers at telecom wavelengths. The phase mask technique is employed to fabricate several superimposed gratings with slight different periods in order to form Moiré structures with a single or various π phase shifts along the device. Simulations and experimental results are included in order to demonstrate very narrowband transmission filters. Experimental characterization under strain and temperature variations is provided in a non-annealed fiber and time stability of the fabricated devices has been also measured under different pre-strain conditions.
Thermally tunable filters based on third-order microring resonators for WDM applications

Ting Hu,Wanjun Wang,Chen Qiu,Ping Yu.,Huiye Qiu,Yong Zhao,Xiaoqing Jiang,Jianyi Yang

DOI: https://doi.org/10.1109/LPT.2012.2182988

IF: 2.6

2012-01-01

IEEE Photonics Technology Letters

Abstract:We design and fabricate a thermally tunable third-order microring resonator filter based on silicon nanowire waveguides. Box-like response with low intraband ripple (~0.65 dB) and high out-of-band rejection over 40 dB is demonstrated. The insertion loss at the center of the passband is less than 0.9 dB. The filter response is successfully tuned by one free spectral range through thermo-optic effec...
Polarization independent polymer waveguide tunable receivers incorporating a micro-optic circulator

Xiaoping Wu,Tae-Hyun Park,Su-Hyun Park,Jun-Kyu Seo,Min-Cheol Oh

DOI: https://doi.org/10.1016/j.optcom.2018.02.018

IF: 2.4

2018-01-01

Optics Communications

Abstract:In order to simplify the receiver configuration in a wavelength division multiplexed optical fiber network, compact wavelength tunable filters have long been expected to be used as channel selectors. Bragg reflector inherently has the most suitable reflection spectrum for filtering a single wavelength from the densely multiplexed wavelength signal. Polymer has high thermo-optic coefficient and good thermal insulation property compared to the other optical waveguide materials such as silicon and silica materials. This can be used to broadly tune the reflection spectrum of Bragg reflector using a simple micro-heater. In this work, a micro-optic circulator component and a polymeric Bragg reflector device are assembled to produce a small form factor tunable receiver. Compared to the integrated-optical versions, the micro-optics are based on well-developed manufacturing processes and can achieve competitive production yields. The device exhibits high reflectivity with a flat top passband, and a polarization dependence of 0.06 nm achieved by virtue of the low birefringence of LFR polymer, which make a significant contribution to the implementation of polarization independent tunable receiver. The wavelength tuning range of 40 nm is demonstrated by using a bottom located heater with a groove for heat isolation.
Broadband Tunable Filter Based on the Loop of Multimode Bragg Grating.

Jianfei Jiang,Huiye Qiu,Gencheng Wang,Yan Li,Tingge Dai,Xiaofei Wang,Hui Yu,Jianyi Yang,Xiaoqing Jiang

DOI: https://doi.org/10.1364/oe.26.000559

IF: 3.8

2018-01-01

Optics Express

Abstract:A broadband tunable silicon filter has been demonstrated on silicon-on-insulator platform. The device is based on the loop of multimode anti-symmetric waveguide Bragg grating. A wide bandwidth tunability about 1.455 THz (0.117-1.572 THz) is achieved. The device, functions like a ring, can realize the bandwidth tunable of the drop port and the through port. And, its feature has simultaneous wavelength tuning and no free space ranges limitation. A high out-of-band contrast of 30 dB is achieved with a bandwidth of 1.572 THz (Δλ = 13 nm). The out-of-band contrast is 18 dB at the minimum bandwidth 0.117 THz (Δλ = 1.0 nm).
High Sensitivity Long-Period Grating Tunable Filters in Standard Communication Fibers and Their Pdl Reduction

CL Wei,JJ He,M Cada

DOI: https://doi.org/10.1117/12.567361

2004-01-01

Abstract:In this paper we report the investigation results of tunable filters by using high-sensitivity cladding modes in standard communication fibers and their PDL reduction. By choosing temperature and strain sensitive cladding modes and through proper packaging to combine the strain effect into the temperature effect, enhanced temperature sensitivity has been achieved. A combined sensitivity of 250 pm/degreesC by temperature tuning has been demonstrated in standard fibers. We further found that the tunable filters using high sensitivity cladding modes show remarkably higher polarization dependent loss (PDL), compared to those using low sensitivity ones. We derived an expression to quantitatively link the filter PDL (through resonant wavelength separation) to the sensitivities of the cladding modes and other related birefringence sources, including the process (UV or CO2 laser) induced and the fiber intrinsic birefringence. We proposed PDL reduction methods and demonstrated that the PDL due to both the induced and the intrinsic sources can be removed.
Silica-Based Arrayed Waveguide Grating With Flattened Spectral Response Using A Multimode Interference Coupler

Yz Tang,Km Jia,By Li,Jy Yang,Xq Jiang,Ym Wu,Yl Wang

DOI: https://doi.org/10.1088/0256-307X/21/6/024

2004-01-01

Chinese Physics Letters

Abstract:We designed and fabricated an arrayed waveguide grating based on silica-on-silicon materials with flattened spectral response by adding a multimode interference coupler in the input region. The theoretical analysis and calculation are given. The device has worked effectively and has been tested with the passband 0.43 nm at 1 dB, 0.72 nm at 3 dB and 1.56 nm at 20 dB respectively, at a cost of power penalty of about 1.5 dB. The crosstalk is less than -30 dB, owing to the high-resolution photomask and well-controlled fabrication processes.
Tilted Waveguide Gratings and Implications for Optical Waveguide-Ring Resonator

Huilian Ma,Jianjie Zhang,Zhen Chen,Zhonghe Jin

DOI: https://doi.org/10.1109/jlt.2015.2466093

IF: 4.7

2015-01-01

Journal of Lightwave Technology

Abstract:In this paper, a novel optical waveguide-type ring resonator by inserting titled waveguide gratings (TWGs) with the Brewster's angle is proposed. Using the Marcatili approximation, the electric fields for a rectangular waveguide is obtained. Then, the volume current method (VCM) is first developed for rectangular-core TWGs. By the VCM, the feasibility of the TWGs to filter the s-polarized light propagating in the resonator is proved. When a 4-cm-long 45°-titled TWG is applied to a silica waveguide-ring resonator, a polarization extinction ratio of 40 dB is obtained. The influences of the angular misalignment as well as the grating period of the TWGs are also evaluated.
A Low Loss Band-Rejection And Band-Pass Filter Based On Silicon Photonic Multimode Bragg Gratings

Jianfei Jiang,Huiye Qiu,Yan Li,Gencheng Wang,Tingge Dai,Hui Yu,Jianyi Yang,Xiaoqing Jiang

DOI: https://doi.org/10.1109/cleoe-eqec.2017.8087116

2017-01-01

Abstract:Bragg gratings based devices have been widely employed in communication and sensing systems [1-2]. Conventional waveguide Bragg grating is a two-port device, so reflected light will damage the stability of the laser via its input port. Therefore, it is meaningful to design a waveguide Bragg grating with the separation of the input and the reflection in integrated photonic circuits. In this work, we design and fabricate anti-symmetric Bragg gratings in a multimode silicon strip waveguide, in which the contra-directional coupling occurs between the TE 0 and the TE 1 modes. An adiabatic coupler is used to drop the reflected TE 1 mode.
Widely Wavelength-Tunable Mode Converter Based on Polymer Waveguide Grating

Yu Yang,Kaixin Chen,Wei Jin,Kin Seng Chiang

DOI: https://doi.org/10.1109/lpt.2015.2448793

IF: 2.6

2015-01-01

IEEE Photonics Technology Letters

Abstract:We design and fabricate a corrugated grating on a polymer waveguide for the realization of the conversion between the fundamental mode and the higher order mode. The transmission characteristics of the device are insensitive to the polarization state of the input light. Our typical fabricated device shows a mode conversion efficiency higher than 99% over a bandwidth of similar to 4 nm and a temperature sensitivity of 3.5 nm/degrees C, which allows the operation wavelength of the device to be tuned over the C + L band with a temperature control <30 degrees C. This mode converter could be integrated with other waveguide devices to realize more sophisticated functions for mode-division-multiplexing systems.
Sidewall Corrugation-Modulated Phase-Apodized Silicon Grating Filter

Wei Jiang,Jijun Feng,Shuo Yuan,Haipeng Liu,Zhiheng Yu,Cunliang Yang,Wenbo Ren,Xincheng Xia,Zhengjie Wang,Fengli Huang

DOI: https://doi.org/10.3390/mi15060666

IF: 3.4

2024-05-22

Micromachines

Abstract:In this work, phase-apodized silicon grating filters with varying sidewall corrugation width and location were investigated, while the resonance wavelength, extinction ratio, and rejection bandwidth were tuned flexibly. The grating filters with a waveguide width of 500 nm and grating period of 400 nm were fabricated and characterized as a proof of concept. The resonance wavelength of the device can be shifted by 4.54 nm by varying the sidewall corrugation width from 150 to 250 nm. The corresponding rejection bandwidth can be changed from 1.19 to 2.03 nm by applying a sidewall corrugation location offset from 50 to 200 nm. The experimental performances coincide well with the simulation results. The presented sidewall corrugation-modulated apodized grating can be expected to have great application prospects for optical communications and semiconductor lasers.

nanoscience & nanotechnology,instruments & instrumentation,physics, applied,chemistry, analytical
Band-rejection Filter Based on Cascaded Two Sidewall Gratings in Multimode Polymer Waveguide

Rui Cao,Lingfang Wang,Kaixin Chen

2019-01-01

Abstract:A simple band-rejection filter based on cascaded long period gratings in polymer waveguide is designed and demonstrated. Our fabricated device shows a maximum extinction ratio of similar to 19 dB around 1555 nm.
High-Efficiency and Polarization-Insensitive Grating Couplers on Thin-Film Lithium Niobate Waveguides

Haoyang Tan,Zhaoyang Chen,Bin Chen,Shiming Gao,Xiaowei Guan

DOI: https://doi.org/10.1364/cleo_at.2024.atu4m.1

2024-01-01

Abstract:We demonstrate polarization-insensitive grating couplers on thin-film lithium niobate waveguides. Inverse optimization method is used and the fabricated couplers exhibit efficiencies of - 6 dB for the TE mode and - 6.5 dB for the TM mode.
Inverse Design of the Multimode Bragg Grating Based on Time-Domain Layer Peeling Method

Xiaofei Wang,Hui Yu,Nannan Ning,Qikai Huang,Yuehai Wang,Xiaoqing Jiang,Jianyi Yang

DOI: https://doi.org/10.1117/12.2644810

2022-01-01

Abstract:Multimode waveguide Bragg gratings filters with square shape amplitude responses and well-controlled dispersion characteristics are achieved by the Time-Domain Layer Peeling method for the first time, the Bragg grating structures can be mapped by the complementary lateral-misalignment modulation apodization. Three filters with different amplitude and phase responses are demonstrated. For the dispersion-less filter, the dispersion compensation filter and the three-channel dispersionless filter, the 3 dB bandwidth and the group delay of the realizable spectral responses are 4.0 nm, 4.7 nm, 2.1 nm and 0 ps/nm, 5.7 ps/nm, 0 ps/nm, the group delay ripples have a standard deviation of 1.7 ps, 1.5 ps, and 2.0 ps. The multimode relaxes the fabrication requirement in terms of both the lithography resolution and minimum feature size/spacing while maintaining the advantages of low insertion loss.
Tunable Terahertz Filters Based on Gold-Coated Silicon Plates With Corrugations

Jing Ma,Jie Li,Huan Liu,Ya-Yun Zhang,Ya-Xian Fan,Zhi-Yong Tao

DOI: https://doi.org/10.1109/lpt.2024.3406024

IF: 2.6

2024-06-04

IEEE Photonics Technology Letters

Abstract:We experimentally demonstrate a tunable terahertz (THz) filter based on parallel plate waveguides with corrugations. The filter is achieved by placing two gold-coated silicon plates with periodic grooves face to face, which are fabricated through laser ablation combined with sputtering coating process. The etched periodic corrugations attenuate certain frequencies of THz waves, leading to frequency bandgaps. When the two wider grooves are introduced, the perfect periodicity of the structure is broken, two additional transmissions with narrow linewidths appear within the bandgap, with the full width at half maximum (FWHM) of about 3 to 4 GHz and a minimum extinction ratio of 30 dB, which are attributed to the local resonances caused by defects. By changing the numbers of grooves between defects, the defect mode coupling is observed, and a broadband transmission with the FWHM of about 8 GHz is obtained. Therefore, we can achieve a tunable filtering from dual narrowband to broadband by adjusting the distance between defects. Our proposed THz tunable filters provide a very efficient method for the design and fabrication of THz waveguide devices, which can be applied to various THz systems.

engineering, electrical & electronic,optics,physics, applied

Tunable Transmission Filters Based on Corrugated Sidewall Bragg Gratings in Polymer Waveguides

Programmable All-Fiber Structured Waveshaper Based on Linearly Chirped Fiber Bragg Grating and Digital Thermal Controller

Narrow-Band Add-Drop Filter Based on Cladding-Modulated Apodized Multimode Bragg Grating

Polymeric Multi-Channel Bandpass Filters in Phase-Shifted Bragg Waveguide Gratings by Direct Electron Beam Writing

Photonic Microwave Transversal Filter Employing A Fiber-Bragg-Grating-Based Multiple Resonator

Integration of a multimode interference coupler with a corrugated sidewall Bragg grating in planar polymer waveguides

Silicon Band-Rejection and Band-Pass Filter Based on Asymmetric Bragg Sidewall Gratings in A Multimode Waveguide

Bandpass Transmission Filters Based on Phase Shifted Fiber Bragg Gratings in Microstructured Polymer Optical Fibers

Thermally tunable filters based on third-order microring resonators for WDM applications

Polarization independent polymer waveguide tunable receivers incorporating a micro-optic circulator

Broadband Tunable Filter Based on the Loop of Multimode Bragg Grating.

High Sensitivity Long-Period Grating Tunable Filters in Standard Communication Fibers and Their Pdl Reduction

Silica-Based Arrayed Waveguide Grating With Flattened Spectral Response Using A Multimode Interference Coupler

Tilted Waveguide Gratings and Implications for Optical Waveguide-Ring Resonator

A Low Loss Band-Rejection And Band-Pass Filter Based On Silicon Photonic Multimode Bragg Gratings

Widely Wavelength-Tunable Mode Converter Based on Polymer Waveguide Grating

Sidewall Corrugation-Modulated Phase-Apodized Silicon Grating Filter

Band-rejection Filter Based on Cascaded Two Sidewall Gratings in Multimode Polymer Waveguide

High-Efficiency and Polarization-Insensitive Grating Couplers on Thin-Film Lithium Niobate Waveguides

Inverse Design of the Multimode Bragg Grating Based on Time-Domain Layer Peeling Method

Tunable Terahertz Filters Based on Gold-Coated Silicon Plates With Corrugations