Abstract:In this work, a coaxial dielectric barrier discharge reactor has been developed for the decomposition of CO2 at atmospheric pressure. The response surface methodology based on a three-factor, three-level Box-Behnken design has been developed to investigate the effects of key independent process parameters (discharge power, feed flow rate, and discharge length) and their interactions on the reaction performance in terms of CO2 conversion and the energy efficiency of the plasma process. Two quadratic polynomial regression models have been established to understand the relationships between the plasma process parameters and the performance of the CO2 conversion process. The results indicate that the discharge power is the most important factor affecting CO2 conversion, while the feed flow rate has the most significant impact on the energy efficiency of the process. The interactions between different plasma process parameters have a very weak effect on the conversion of CO2. However, the interactions of the discharge length with either discharge power or gas flow rate have a significant effect on the energy efficiency of the plasma process. The optimal process performance-CO2 conversion (14.3%) and energy efficiency (8.0%) for the plasma CO2 conversion process is achieved at a discharge power of 15.8 W, a feed flow rate of 41.9 ml.min(-1) and a discharge length of 150 mm as the highest global desirability of 0.816 is obtained at these conditions. The reproducibility of the experimental results successfully demonstrates the feasibility and reliability of the design of experiments approach for the optimization of the plasma CO2 conversion process.

A New Structure Optimization Method for the Interneedle Distance of a Multineedle-to-Plane Barrier Discharge Reactor

Optimization of Experimental Discharge Parameters to Increase the Arc Efficiency of the Bucket Ion Source

Energy efficiency optimization for H2S removal by dielectric barrier discharge plasma

Optimization of Space Between Nearby Needles on Multineedle to Plane Barrier Discharge

Structural Optimization of Multi-Needle to Plane Electrodes for Dielectric Barrier Discharge

An Integrated Approach to Understanding the Mass Transfer and Reaction Processes in a Pulsed High-Voltage Discharge Reactor

Optimization of CO2 Conversion in a Cylindrical Dielectric Barrier Discharge Reactor Using Design of Experiments

Optimization of Spatial Structure Designs of Control Rod Using Monte Carlo Code RMC

Dual-course dielectric barrier discharge with a novel hollow micro-holes electrode to efficiently mitigate NO x

Dual-course Dielectric Barrier Discharge with a Novel Hollow Micro-Holes Electrode to Efficiently Mitigate NOx

Influence of rotating dielectric barrier on discharge characteristics in multi‐needle‐plate DBD

Static Electric Field Intensity Calculation of Two Kinds of Electrode Structure Plasma Generator

Process Optimization for Microcystin-Lr Degradation by Response Surface Methodology and Mechanism Analysis in Gas-Liquid Hybrid Discharge System

Comparative Study Between Single- and Double-Dielectric Barrier Discharge Reactor for Nitric Oxide Removal

Scale-up Experiment of Plasma Reactors with Different Electrode Structure

Design and Optimization of a Hybrid Excitation System for Magnetically Driven Rotating DC Arc Plasma Generators

Impact of the geometric structure parameter on the performance of dielectric barrier reactor for toluene removal

The effects of inner electrode shape on the performance of dielectric barrier discharge reactor for oxidative removal of NO and SO2

Distribution of electric field and structure optimisation on the surface of a ±1100 kV smoothing reactor

Improvement of Atmospheric Water Surface Discharge with Water Resistive Barrier

Wire-Tube DBD Reactor for H2S Treatment: Optimization of Materials and Configurations