Abstract:Based on heat conduction theory,a finite element method is introduced to investigate the three-dimensional transient temperature fields in a moving plate irradiated by a laser beam.The laser beam is assumed to be with Gaussian distribution,and the plate is considered as infinite along the motion direction,while the width and the height are finite.Considering the thermal physical parameters depended on temperature,convection and radiation factors of the surfaces,and the motion of the plate,the temperature fields on the upper and bottom surfaces of the plate are obtained.The numerical results show that the quasi-steady state temperature fields are approached.Comparing the temperature fields obtained by before and after considering the factors described above,it shows that the temperature dependences of the thermal properties of the material have distinct influences on the temperature fields.In the conditions that the thermal conductivity and thermal capacity of the material are dependent of temperature,the results are presented for two cases:(1) when neglecting temperature dependence of the thermal capacity,the maximum temperature and the quasi-steady state temperature are both higher than those of considering the temperature dependence;(2) when neglecting temperature dependence of the thermal conductivity,the maximum temperature will decrease while the quasi-steady state temperature will be the same as that of considering the temperature dependence.In addition,with increasing the convective heat transfer coefficient at the upper surface,the maximum temperature and the quasi-steady state temperature will decrease,while the effect of radiative heat losses of the surface can be ignored.Meanwhile,changing the moving velocity not only affects the temperature fields,but also alters the maximum temperature and the time for reaching the quasi-steady state condition.Furthermore,with the radius of the laser source decreasing,the maximum temperature and quasi-steady state temperature will both increase,while the former change is more obvious.

Non-Fourier heat conduction studying on high-power short-pulse laser ablation considering heat source effect

Theoretical Analysis of Thermal-Lensing Effect in a High Power Exciplex Pumped Cs Vapor Laser.

Simulation and Analysis of the Time Evolution of Laser Power and Temperature in Static Pulsed XPALs

Thermal regime and effect studying on the ablation process of thin films prepared by nanosecond pulsed laser

Vaporization effect studying on high-power nanosecond pulsed laser deposition

Numerical analysis of wave-type heat transfer propagating in a thin foil irradiated by short-pulsed laser

Laser–target interaction during high-power pulsed laser deposition of superconducting thin films

Theoretical and experimental study of femtosecond pulse laser heating on thin metal film

Effect of non-local transport of hot electrons on the laser-target ablation

Molecular Dynamics Simulation Of Ultra-Fast Thermal Transition In Thin Foil Irradiated By High Power Ultra-Short Laser

A fractional dual-phase-lag generalized thermoelastic model of ultrashort pulse laser ablation with variable thermal material properties, vaporization and plasma shielding

Theoretical Study of Transient Thermal Conduction and Temperature Distribution Generated by Pulsed Laser

Theoretical Analysis and Simulation of Pulsed Laser Heating at Interface

Simulation of evaporation ablation dynamics of materials by nanosecond pulse laser of Gaussian beam and flat-top beam

Improved thermal model and its application in UV high-power pulsed laser ablation of metal target

The ultrashort pulse laser ablation model of silicon based on the generalized thermoelastic theory with spatio-temporal nonlocal effect

Finite element analyses of temperature fields in moving solids irradiated by a laser source

A generalized thermoelastic diffusion problem of thin plate heated by the ultrashort laser pulses with memory-dependent and spatial nonlocal effect

Physics of picosecond pulse laser ablation

The Effect of Target Thickness on the Efficiency of High-Order Harmonics Generated from Laser-Driven Overdense Plasma Target

Critical pulse in multi-shot femtosecond laser ablation on metallic surfaces