Abstract:Ceramic cutting tool materials possess specific advantages, including high hardness, excellent wear resistance, and high chemical stability, making them unparalleled in the machining of difficult-to-process materials compared to traditional cutting tools. The mechanical performance of these materials is primarily determined by their microstructure. Therefore, it is necessary to simulate and optimize the microstructure of ceramic cutting tool materials to provide theoretical guidance for further enhancing their fracture toughness. In this paper, a simulation model based on sintering densification theory was proposed, coupling crystal plasticity with a three-dimensional cellular automaton, to investigate the impact of nanoparticle content, sintering temperature , sintering pressure, and holding time on grain growth in composite ceramic materials using spark plasma sintering (SPS). Furthermore, an evolution model for grain growth of TiB 2 -TiC-SiC nanocomposite ceramic materials in cutting tools is established, and the optimal sintering process parameters are obtained. Finally, SPS experiments were conducted. Under the conditions of a sintering temperature of 1600 °C, holding time of 7 min, and sintering pressure of 40 MPa, optimal mechanical performance composite ceramic cutting tool materials were prepared. The experimental results, including a hardness of 25.6 GPa, fracture toughness of 7.1 MPa·m 1/2 , and flexural strength of 628.2 MPa, were consistent with the simulation outcomes. This indicates that the designed simulation model for nanocomposite ceramic grain growth reliably reflects the physical process of grain growth in the material and provides valuable guidance for further understanding the mechanisms underlying grain growth.

Simulation of Ceramic Grain Growth Based on Monte Carlo Method

Monte-Carlo simulation of grain growth in Vapor-Liquid-Solid phase sintered material

Monte-carlo modeling for grain growth process in Vapor-Liquid-Solid phase sintered materials

Nano CaO Grain Characteristics and Growth Model under Calcination

Monte-Carlo simulation of isotropic and anisotropic grain growth in liquid phase sintered ceramics

Monte Carlo simulation of ceramic grain growth during laser ablation processing

Grain evolution simulation of ceramic tool material in spark plasma sintering process based on an improved cellular automata model

Studies and Technical Development of Computer Simulation for Sintering and Grain Growth

Monte Carlo Simulation of Three-Dimensional Polycrystalline Material

Computer simulation of grain growth in two dimensions in annealing process

Numerical Simulation of Microstructure Evolution Based on A Modified Ca Method

Monte carlo based strategy to simulate the microstructure evolution of the short-fiber reinforced metal matrix composites

Coupled macro-micro modeling for prediction of grain structure of Al alloy

A coupled macro-micro simulation for the prediction of microstructure of Al alloy castings

Three-dimensional modeling of grain structure growth within ceramic tool material

Numerical simulation of microporosity evolution of aluminum alloy castings

Study of Grain Growth in a Ni-Based Superalloy by Experiments and Cellular Automaton Model

Monte carlo simulation of microstructure evolution during grain growth

Modeling morphology evolution and densification during solid-state sintering via kinetic Monte Carlo simulation

Three-dimensional Numerical Simulation of Meso-Scale Dendritic Growth in Alloys

Numerical Simulation of Dendrite Growth of Aluminum Alloy