Abstract:Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.

Coupled macro-micro modeling for prediction of grain structure of Al alloy

A coupled macro-micro simulation for the prediction of microstructure of Al alloy castings

3D Stochastic Modeling of Grain Structure for Aluminum Alloy Casting

Numerical Simulation of Dendrite Growth of Aluminum Alloy

Modeling of As-Cast Microstructure of Al Alloy with A Modified Cellular Automaton Method

Three-dimensional Numerical Simulation of Meso-Scale Dendritic Growth in Alloys

Phase-field Simulation of Competitive Growth of Grains in a Binary Alloy During Directional Solidification

Phase-field model of isothermal solidification in multicomponent alloys for multiple grains

Three Dimensional Numerical Simulation of Solidification Microstructure of Single Phase Alloy

Numerical Modelling Of Microstructure Evolution And Dendrite Growth In Alloy Solidification Process

Numerical Modeling of Microstructure Evolution and Dendrite Growth for Al-Si Alloy Casting During Low Pressure Die Casting

Phase-Field Model of Isothermal Solidification of Binary Alloy with Multiple Grains

Phase-Field Model of Isothermal Solidification with Multiple Grain Growth

Microstructure Modelling and Simulation of Shaped Casting with Mca Method

Simulation for microstructure evolution of Al-Si alloys in solidification process

Numerical simulation of microstructure of aluminum alloy casting using macro-micro coupled method

Phase-field Model of Dendrite Growth of Multicomponent Alloy with Multiple Grains

Direct Macroscopic Modeling of Grain Structure and Macrosegregation with a Cellular Automaton–Finite Element Model

Modeling and Simulation Investigations on Microstructure Evolution during Additive Manufacturing of AlSi10Mg Alloy

3D Modeling and Simulation of Dendritic Growth During Solidification

Computer modeling and prediction of solidified microstructure of casting alloy