Abstract:In order to study the characteristics of fire smoke spread and temperature distribution of a large indoor pedestrian street under different heat release rates and smoke exhaust modes, this paper focuses on the analysis of fire smoke spread, visibility, smoke temperature distribution and variation curves in an atrium. This paper uses a numerical simulation method to conduct research. PyroSim fire simulation software is used to calculate this project, which is based on a full-scale experimental design scheme. The numerical simulation results show that under the conditions of higher heat release rate, the smoke spread rate is greater than that under the conditions of lower heat release rate. Furthermore, the average temperature of smoke in the atrium is also greater, up to about 400 °C. The conditions of a higher heat release rate also show the characteristics of faster generation, faster spread and a larger volume of smoke. When the smoke exhaust system is turned on, the thickness of the smoke layer and the smoke temperature decrease. There then comes a situation where the stabile section of the fire ends in advance. The simulation results of vertical temperature distribution in an atrium can fit the modified McCaffrey plume model in any case. Under all cases, the smoke temperature reaches the maximum directly above the fire source. The horizontal dimensionless smoke temperature rises under the atrium roof, and decreases exponentially with the dimensionless distance from the fire source. The greater the heat release rate of fire source is, the smaller the attenuation coefficient is, with a more than 50% change. When the smoke exhaust system is turned on, the smoke flow accelerates and the smoke is cooled rapidly. Thus, the attenuation coefficient increases. Additionally, the effect of mechanical smoke exhaust is better than natural smoke exhaust, because mechanical smoke exhaust makes air flow and heat exchange more intense. The variation amplitudes of the attenuation coefficient under natural smoke exhaust and mechanical smoke exhaust are 13% and 22%, respectively.

Comparison of Numerical Simulation and a Fire Experiment in Storehouse

Experimental Study and Numerical Simulation for A Storehouse Fire Accident

Apply numerical simulation method to chemical industry fire investigation

Numerical Simulations of a House Fire for Fire Investigation

Experimental and Numerical Investigations on Fire Development in a Timber-Based Compartment with Identification of Characteristic Events

Numerical Simulation on Smoke Temperature Distribution in a Large Indoor Pedestrian Street Fire

Experimental and Numerical Studies of Multi-compartment Spreading Fire in a Full-Scale Steel Framed Building

Numerical Simulation Application in Fire Investigation

Numerical Simulation of Wood Crib Fire Behavior in A Confined Space Using Cone Calorimeter Data

Numerical Study on Temperature Distribution of Structural Components Exposed to Travelling Fire

A Study on Temperature Characteristic in Enclosed Cabin Fire

Comparison of Rise Time of Smoke Plume Front Predicted for High Space by A Field Model with Full-Scale Experiments

Reconstruction of a Typical Triple-Up Building Fire Based on Numerical Simulation

Numerical investigation on the hazard of heat and smoke in a store fire

Numerical Simulation for Special-typed Big Fires

Experimental Study on Fire Smoke Movement in a Multi-Floor and Multi-Room Building

Numerical Simulation Analysis on Temperature Field for Large-space Structures under Fire

An Experimental Study on the Effect of Fire Location on the Smoke Hazard in a Typical Building Structure Apparatus

Numerical Investigation on Smoke Movement in a Large Space Building under Fire Scenarios

Experimental and Numerical Studies on Longitudinal Smoke Temperature Distribution Upstream and Downstream from the Fire in a Road Tunnel

Effect of Different Fuels on Confined Compartment Fire