Abstract:The steel box arch bridge in this study will be subjected to various temperature effects from the construction to the operation stage, including the cement hydration heat effect and the sunshine temperature effect caused by an ambient temperature change. Therefore, it is very important to control the temperature effect of steel box arch bridges. In this study, the newly built Dafeng River Bridge is selected as the steel box arch bridge. This study aims to investigate the temperature effect including hydration heat and the sunshine temperature effect of the construction process of a rigid frame-tied steel box arch bridge. The manuscript presents that the heat dissipation performance of concrete decreases with the increase in the thickness of a mass concrete structure. The average maximum temperature values of layer No. 3 are about 1.3, 1.2, and 1.1 times the average maximum temperature value of layer No. 1 for the mass concrete of the cushion cap, main pier and arch abutment, respectively. The higher the molding temperature is, the higher the maximum temperature by the hydration heat effect is. With each 5 °C increase in the molding temperature, the maximum temperature at the core area increases by about 4~5 °C for the mass concrete. The pipe cooling method is conducive to the hydration heat control effect of mass concrete. Based on the monitored temperature change and displacement change, the influences of daily temperature change on the steel lattice beam and arch rib are analyzed. A temperature rise will cause the structure to have a certain camber in the longitudinal direction, and the longitudinal or transverse displacement caused by the sunshine temperature change is no less than the vertical displacement. Due to the symmetrical construction on both sides of the river, the arch rib deformation on both sides presents symmetrical synchronous changes. Based on 84 h of continuous temperature monitoring on-site, the changing trends of the arch back temperature and ambient temperature are consistent and their difference is small during 1:00~4:00 in the morning, which is determined as the appropriate closure time for the newly built Dafeng River Bridge.

Research on Temperature Variations of a Concrete Continuous Rigid-Frame Bridge in South China Based on Long-Term Temperature Monitoring

Evaluation of Thermal Effects on Cable Forces of a Long-Span Prestressed Concrete Cable–Stayed Bridge

Control Measures for Thermal Effects During Placement of Span-Scale Girder Segments on Continuous Steel Box Girder Bridges

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

Temperature Field Characteristics and Cooling Measures of Steel Box Girder of Cross-Sea Bridge

Temperature Numerical Analysis of A Large Rigid-Continuous Concrete Bridge

Study on Temperature Gradient of Concrete Box Girder of Continuous Rigid Frame Bridge over Humen Auxiliary Navigation Pass of Guangdong Province

Investigation of temperature effects on wide steel box girder of suspension bridge based on long-term monitoring data

Temperature Effects on Strains of A Continuous Box-Girder Bridge with A Long-Term Monitoring System

Temperature Field Determination of Long-span Continuous Box-girder Bridges in Construction Period and Analysis of Its Effect

Hydration Heat Control of Mass Concrete by Pipe Cooling Method and On-Site Monitoring-Based Influence Analysis of Temperature for a Steel Box Arch Bridge Construction

Analysis of Temperature Stress in Bridges Considering Vertical and Transverse Temperature Gradient

Temperature Field Boundary Conditions and Lateral Temperature Gradient Effect on a PC Box-Girder Bridge Based on Real-Time Solar Radiation and Spatial Temperature Monitoring

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Fiber Bragg Grating Temperature Sensor System on A Twin-Deck Continuous Rigid Frame Bridge for Long Term Monitoring

Continuous Box-Girder Bridge Condition Assessment Based on Structural Health Monitoring System: A Case Study

Temperature gradient estimation of long-span concrete box girders using average conditional exceedance rate function

The Temperature Field Test and Analysis During the Cantilever Construction of the Long-span Continuous Rigid-frame Bridge

Analysis of temperature-induced deformation and stress distribution of long-span concrete truss combination arch bridge based on bridge health monitoring data and finite element simulation

Effect analysis of temperature in the large continuous rigid frame bridge

Modeling of Temperature Distribution in a Reinforced Concrete Supertall Structure Based on Structural Health Monitoring Data