Sulfur Poisoning and Regeneration of MnOx-CeO2-Al2O3 Catalyst for Soot Oxidation

Wu Xiaodong,Lee Hyeong-Ryeol,Liu Shuang,Weng Duan

DOI: https://doi.org/10.1016/s1002-0721(12)60108-2

IF: 4.632

2012-01-01

Journal of Rare Earths

Abstract:MnOx-CeO2-Al2O3 mixed oxides were prepared by impregnating manganese and cerium precursors on alumina powders via a sol-gel deposition method. The oxide catalyst exhibited a poor resistance to sulfur dioxide after the treatment in 100 ppm SO2/air at 350°C for 50 h. The formation of manganese sulfate and especially cerium sulfate reduced the availability of surface active metal oxides, blocked the pore structure and decreased the surface area of the catalyst. These changes in chemical and structural and textural properties resulted in a severe loss in the activities of the sulfated catalyst for NO and soot oxidation. The decomposition of sulfates was almost complete during the calcination in air at 800°C for 30 min, which partially recovered the surface active sites and the catalyst surface area despite the significant sintering of metal oxides. Consequently, the NOx-assisted soot oxidation activity of the catalyst was regenerated to some extent by the oxidation treatment.