Abstract:Polystyrene (PS) is a widely used building insulation material with good mechanical strength and strong temperature adaptability. However, PS itself is highly flammable and displays poor flame retardancy. At present, building fires caused by organic external wall thermal insulation materials prepared from PS represent a new fire hazard. In this study, the addition of an intumescent flame retardant (IFR) to reduce the flammability of PS was achieved. Using melamine (MEL), acrylonitrile-styrene-acrylate (ASA), and phytic acid (PA) as raw materials, a new type of flame retardant (MAP) was prepared by an electrostatic self-assembly method and was introduced to modify PS. Its effect on the flammability of PS composites was also investigated. The flammability of the PS composites was characterized using the limiting oxygen index (LOI) and vertical combustion. The effect of MAP on the morphology of the carbon layer formed from polymer decomposition was studied using scanning electron microscopy (SEM). By adding MAP to a PS/20%N-IFR flame-retardant composite, the flame-retardant property was significantly improved, the limiting oxygen index reached 37, and the vertical combustion reached a V-0 level. The fire performance index (FPI) of the PS/20%N-IFR composite reached 0.0054, which was significantly higher than that of the control PS (0.037) as determined by the cone calorimetry test. The SEM results showed that the introduction of MAP can increase the density of the carbon layer after combustion. The heat release rate for combustion was reduced. In addition, the mechanical properties of the PS/20%N-IFR composites were compared with those with no flame retardant. The tensile strength of the PS/20%N-IFR composite was 26.1 MPa and the elongation of the PS/20%N-IFR composite remained at 2.2%. The PS/20%N-IFR composite displayed better flame retardancy than the untreated material and good mechanical properties. The presence of MAP prevented the heat and oxygen transfer and interrupted the releasing of flammable products, thus protecting the PS from burning. This flame-retardant material may find broad applications in building insulation materials.

Effect of Styrene‐maleic Anhydride As a Reactive Compatibilizer on the Mechanical Properties and Flammability of Intumescent Flame Retardant Polystyrene

Effects of reactive compatibilization on the morphological, thermal, mechanical, and rheological properties of intumescent flame-retardant polypropylene.

Flame Retardation and Thermal Degradation of Intumescent Flame‐retarded Polypropylene Composites Containing Spirophosphoryldicyandiamide and Ammonium Polyphosphate

Mechanical Properties and Thermal Degradation of Flame Retardant PC/HDPE Blending with Spirocyclic Hydroxybenzene Phosphate

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Improving the flame retardancy and mechanical properties of high-density polyethylene-g-maleic anhydride with a novel organic metal phosphonate

Fire reaction properties of polystyrene-based composites using hollow silica as synergistic agent

Effect of clay dispersion on the synergism between clay and intumescent flame retardants in polystyrene

Preparation of a New Type of Expansion Flame Retardant and Application in Polystyrene

Preparation of Microencapsulated Nitrogen‑phosphorus‑silicon Flame Retardant and Its Effect on High Impact Polystyrene Flame Retardancy

Flame-retarded polystyrene with phosphorus- and nitrogen-containing oligomer: Preparation and thermal properties

Multi-element Synergistic Effects to Improve the Flame Retardancy of High Impact Polystyrene

Effects of Melamine Cyanurate and Aluminum Hypophosphite on the Flame Retardancy of High-Impact Polystyrene

Study on combustion property and synergistic effect of intumescent flame retardant styrene butadiene rubber with metallic oxides

Toughening and Strengthening Modification of Flame-Retardant High-Impact Polystyrene

Combustion Properties and Thermal Degradation Behavior of Polylactide with an Effective Intumescent Flame Retardant

Characterization of compatibilized blends of nylon 66/poly(2,6-dimethyl-1,4-phenylene ether)/high-impact polystyrene filled with phosphinate-based flame retardants: Mechanical property, rheological behavior, and flame retardancy

Preparation of a novel Fe‐MOF as the flame retardant synergist and its application in polystyrene

Study on Effect of Polydimethylsiloxane in Intumescent Flame Retardant Polypropylene

Ternary intumescent flame retardant composition containing ionic liquid towards efficiently flame‐retardant polystyrene

Investigation of a Combination of Novel Polyphosphoramide and Boron-Containing Compounds on the Thermal and Flame-Retardant Properties of Polystyrene