Abstract:The evolution of microstructures for different hydrogen decrepitated routes was investigated in hydrogenation-disproportionation-desorption-recombination (HDDR) magnetic powders, with particular focus on the fracture of the SC heat-treated alloy during two-step hydrogen decrepitation (HD) and the influence of the first step temperature on magnetic properties. As the temperature increases, the properties of the magnetic powders increase and then decrease, the optimized performance of HDDR magnetic powders was obtained with B r =1.45 T, (BH) max =393 kJ·m −3 , DOA=0.79 when the first HD temperature is 65°C. The microscopic analysis shows that there are two problems in the one-step HD route: one is that the particle size is larger ∼150 μm and there are incomplete fractured cracks, the particle surface is more PrNd-rich phase, which leads to different reaction rates between the surface and center in HDDR particles, and the texture orientation of the fine grains at the edge of surface and crack is disordered. The second issue is that HD grains have significant angular difference with the c-axis orientation in incomplete fractured grain clusters, which is directly inherited by the HDDR magnetic powder, resulting in a misalignment texture. In comparison, the two-step HD process effectively addresses the issues derived from one-step HD process. Not only is the grain size of HDDR magnetic powders uniform and the width of the thin grain boundary phases (GBs) is less than the exchange coupling length, but also (Fe+Co) content exceeding 30 at% in GBs with weak magnetism. This is beneficial for enhancing exchange coupling effect between adjacent grains. Moreover, magnetic powder particle exhibits single-domain characteristics, which improves the grain texture orientation. This research provides a new insight for the development of high-orientation and high-performance HDDR magnetic powders.

Microstructural changes during the disproportionation of Nd13Fe80B7 alloys

Microstructural Evolutions in Ndfe10.5mo1.5nx and Pr13fe80b7 Compounds During Hydrogenation-Disproportionation Desorption Recombination Process

Rodlike Disproportionation Microstructure in the Pr13Fe80B7 Alloys Treated by Conventional HDDR Process

Anisotropic Characteristic in Hddr Nd13fe80b7

Effects of the Disproportionation Stage of the HDDR Process on Magnetic Properties and Microstructure of Pr13Fe80B7 Alloys

Self-organized rod-like nanostructure in Pr2Fe14B-type alloy and its role in inducing texture during the early stages of disproportionation

Microstructural Evolutions of Pr13fe80b7 Alloys During Solid Hddr Process

Reduction of the mechanical anisotropy in hot-deformed Nd-Fe-B magnets by the construction of heterogeneous structure

Effects of Additives on Hydrogen Absorption and Desorption Characteristics of Nd(Fe, Mo)(12) Alloys

Self-Organized Nanorods in Disproportionated Sm2fe17 and Ndfe10.5mo1.5 Alloys

Effects of the Conventional HDDR Process and the Additions of Co and Zr on Anisotropy of HDDR Pr–Fe–B-type Magnetic Materials

Anisotropy optimization of HDDR magnetic powders by precursor alloy annealing

The Effects of Hydrogen Disproportionation, Desorption, and Recombination on the Structure and Magnetic Properties of Sm2Fe17Nx and NdFe10Mo2Nx Compounds

Enhanced anisotropy of Pr-Nd-Fe-B HDDR magnetic powders by regulating the hydrogen decrepitated process

Improvement of Coercivity and Thermal Stability of Anisotropic Nd13fe79.4b7nb0.3ga0.3 Powders by Diffusion of Pr-Cu Alloys

Change of Microstructure and Magnetic Properties of Sintered Nd–Fe–B Induced by Annealing

Effects of Microwave-Assisted Annealing on the Structure and Magnetic Properties of (nd0.75pr0.25)9fe72ti1zr3mn X Mo4−x B10.5C0.5 Amorphous Ribbons

Study on the Influence of Annealing and Ball Milling on the Magnetic Properties of HDDR Nd-Fe-B Magnetic Powder

Mechanical properties and microstructure of Nd-Fe-B magnet diffused by low melting point alloys

Microstructure Evolution of Dy69Ni31-added Nd-Fe-B Sintered Magnets During Annealing

Role of Amorphous Grain Boundaries in Nanocomposite NdFeB Permanent Magnets