Abstract:Ammonia, as an alternative fuel for internal combustion engines, can achieve nearly zero carbon emissions. Although the development of the pure ammonia engine is limited by its poor combustion characteristics, ammonia–hydrocarbon mixed combustion can effectively improve the combustion of ammonia fuel. With the increase in the ammonia fuel proportion in the fuel mixture, a large number of nitrogen oxides (NOX) and unburned ammonia may be discharged, which have a poor impact on the environment. In this study, the performance of selective catalytic reduction (SCR) aftertreatment technology in reducing NOX and ammonia emissions from ammonia–diesel dual-fuel engines was investigated using simulation. A good cross-dimensional model was established under the coupling effect, though the effect of a single-dimensional model could not be presented. The results show that when the exhaust gas in the engine cylinder is directly introduced into the SCR without additional reducing agents such as urea, unburned ammonia flowing into SCR model is in excess, and there will be only ammonia at the outlet; however, if the unburned ammonia fed into the SCR model is insufficient to reduce NO, the ammonia concentration at the outlet will be 0. NOX can be 100% effectively reduced to N2 under most engine conditions; thus, unburned ammonia in exhaust plays a role in reducing NOX emissions from ammonia–diesel dual-fuel engines. However, when the concentration of unburned ammonia in the exhaust gas of an ammonia–diesel dual-fuel engine is large, its ammonia emissions are still high even after the SCR. In addition, the concentrations of N2O after SCR do not decrease, but increase by 50.64 in some conditions, the main reason for which is that by the action of the SCR catalyst, NO2 is partially converted into N2O, resulting in an increase in its concentration at the SCR outlet. Adding excessive air or oxygen into the SCR aftertreatment model can not only significantly reduce the ammonia concentration at the outlet of the model without affecting the NOX conversion efficiency of SCR, but inhibit N2O production to some extent at the outlet, thus reducing the unburned ammonia and NOX emissions in the tail gas of ammonia–diesel dual-fuel engines at the same time without the urea injection. Therefore, this study can provide theoretical guidance for the design of ammonia and its mixed-fuel engine aftertreatment device, and provide technical support for reducing NOX emissions of ammonia and its mixed fuel engines.

Progress of Research on Reducing NOx Emission of Diesel Engine with NH3-SCR Technology

Progress of Research on Selective Catalytic Reduction Technology for Vehicle Diesel Engine

Investigation on an Innovative Sorption System to Reduce Nitrogen Oxides of Diesel Engine by Using Carbon Nanoparticle

Review of state of the art technologies of selective catalytic reduction of NOx from diesel engine exhaust

Review on Selective Catalytic Reduction Technology of Diesel Engines

Progress of Research on Reducing Nox Emission of Diesel Engine with After-Treatment Technology

Recent Advances in SCR Systems of Heavy-Duty Diesel Vehicles—Low-Temperature NOx Reduction Technology and Combination of SCR with Remote OBD

Research Progress on Metal Oxides for the Selective Catalytic Reduction of NOx with Ammonia

Review on Advances in Structure-Activity Relationship, Reaction & Deactivation Mechanism and Rational Improving Design of Selective Catalytic Reduction Denox Catalysts: Challenges and Opportunities

Experimental Research on NH3-SCR Chemical Reaction Characteristics of Diesel Engine

Experimental Study on NOx Reduction of Diesel Engine by EGR Coupled with SCR

Research advance in non-thermal plasma induced selective catalytic reduction NO_x with low hydrocarbon compounds

Effect of Exhaust Gas Recirculation Combined with Selective Catalytic Reduction on NO x Emission Characteristics and Their Matching Optimization of a Heavy-Duty Diesel Engine

Study on Diesel Engine Selective Catalytic Reduction Performance at Different Atmospheric Pressures Using the Response Surface Method

Research status and prospects of NH3-SCR denitration technology

Recent Advances in the Preparation of 8MR Zeolites for the Selective Catalytic Reduction of NOx(NH3-SCR) in Diesel Engines

Research Status and Outlook of Molecular Sieve NH3-SCR Catalysts

Nitrogen Oxides and Ammonia Removal Analysis Based on Three-Dimensional Ammonia-Diesel Dual Fuel Engine Coupled with One-Dimensional SCR Model

Experimental Study on the Particulate Matter and Nitrogenous Compounds from Diesel Engine Retrofitted with DOC+CDPF+SCR

Overview of mechanisms of Fe-based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

Recent advance for NOx removal with carbonaceous material for low-temperature NH3-SCR reaction