Mercury Emission from Co-combustion of Coal and Sludge in a Circulating Fluidized-Bed Incinerator†
Yufeng Duan,Changsui Zhao,Yunjun Wang,Chengjun Wu
DOI: https://doi.org/10.1021/ef900565c
IF: 4.6541
2010-01-01
Energy & Fuels
Abstract:Co-combustion of coal and sewage sludge is known its one of the most effective thermal treatments for sludge use and disposal. However, multiple pollutants emitted from this process, especially heavy metal mercury emission, have become it worldwide concern oil the environment and Public health. An experimental Study Oil mercury emission and its speciation from co-combustion of sludge and coal was conducted in a circulating fluidized-bed incinerator with it fluidized-bed cross-section of 0.23 x 0.23 in and it total height of 7 m, Mercury speciation in flue gas and mercury contents in fly and bottom ashes were measured oil the basis of the Ontario Hydro method. The mercury mass balance of the co-combustion Process was calculated, Effects of some major factors, such as Ca/S molar ratio, desulfurization sorbent categories, excess air coefficient. and SO2 and NOx concentrations, on the distribution of mercury speciation were investigated. Results showed that most of the mercury from the mixed fuel of file coal and Sludge went into the flue gas, in which elemental mercury was the major species. A small amount of mercury remained in the fly ash, and none of the mercury was detected in the bottom ash. As desulfurization sorbents, both CaO and CaCO3 can remove Hg2+ in flue gas effectively, but CaO had a bigger capacity than CaCO3. The percentage of Hg2+ in flue gas was found added with in increase of SO2 and NOx concentrations. It can be concluded that an excess air coefficient exerted dominant influences oil the distribution of mercury Species among flue gas, fly ash, and bottom ash.