Abstract:This paper presents an experimental and theoretical study of surface generation in the ultra-precision grinding of hard and brittle materials. The study takes into account the material properties, the relative vibration between the grinding wheel and the workpiece, the machining parameters and the phase shift of the grinding process. The Taguchi approach is employed to study the influence of machining parameters on the surface quality and shows that the feed speed and rotational speed of the workpiece are key factors. Experiments have been conducted to study individual variables, and the results further show that the feed rate and the cross-feed distance have a significant effect on surface generation. It is found that the spirals around the central area of the workpiece are the primary mechanism for surface generation, which originates from the synchronous relative tool-work vibration. The integral part of the ratio of the rotational speed of the grinding wheel to rotational speed of the workpiece determines the number of spirals and its fractional part controls the spiral geometry. A theoretical model for predicting the single spiral generation has been developed to explain the accumulation of the phase shift and the geometry. The changeable feed speed near the end of grinding is also modelled, revealing the approximate straight lines around one circle in the central region. The simulated results indicate that the theoretical models and the ground surfaces are in close agreement. The scallop-height model is developed to calculate the influence of phase shift on surface quality, and it is found that the phase shift near the medium value can effectively improve surface quality. Finally, a comparison of different surface generation mechanisms in grinding mould steel, tungsten carbide (WC) and reaction bonded silicon carbide (RB-SiC) is made. It is interesting to note that the Spanzipfel effect contributes to the surface generation not only on ductile materials such as mould steel but also on brittle materials such as WC and RB-SiC. The Spanzipfel effect is the most significant in grinding mould steel. For WC and RB-SiC, the ground surface contains both a ductile region and a brittle region in the form of micro-fractures.

Study on Effect of Material Strain Rate in Contact Layer on Surface Integrity in Quick-point Grinding

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

Process parameter optimization and surface integrity evolution in the high-speed grinding of TiAl intermetallics based on grey relational analysis method

Study on the effect of the strengthen grinding process surface coverage on the micro-morphology, micro-hardness, roughness, and residue stress of GCr15 bearing steels

Study on morphology reconstruction of SiC ceramics ground by monolayer-patterned grinding wheel considering strain rate effect

An experimental and theoretical analysis of surface generation in the ultra-precision grinding of hard and brittle materials

Effect of grinding damage on cutting force and ductile machining during single grain scratching of monocrystalline silicon

Atmospheric pressure plasma jet and minimum quantity lubrication assisted micro-grinding of quenched GCr15

Study on the removal mechanism of Si3N4 ceramic material in rotary ultrasonic grinding based on multi-abrasive coupling simulation

Analysis, Modeling and Experimental Study of the Normal Contact Stiffness of Rough Surfaces in Grinding

Influence of Thermal-mechanical Coupling of Single Particle on Grinding Surface Roughness

Effect of Fiber Type and Content on Surface Quality and Removal Mechanism of Fiber-Reinforced Polyetheretherketone in Ultra-Precision Grinding

Investigation of the grinding temperature and subsurface quality of a novel point grinding wheel

Grinding mechanism and surface quality evaluation strategy of single crystal 4H-SiC

Mechanism analysis and process optimization of nanogrinding single-crystal SiC

Distinguishing effect of turning and grinding on the surface integrity and fatigue performance of ultra-high strength steel

Influence mechanism of grinding surface quality of 20CrMnTi steel on contact failure

Multi-Objective Optimization of Surface Integrity in the Grind-Hardening Process

Cross-point effect of high-speed cross scratch on hard brittle materials