Abstract:A series of hydrocracking catalysts based on mesoporous molecular sieves of MCM-41 and SBA-15 with different silica to alumina ratios was prepared. Nickel and molybdenum were used as active metals to impregnate the extrudates prepared by using molecular sieves. The catalysts were characterized for physical and chemical properties and evaluated for the hydrocraking of desulfurised vacuum gas oil. The conversion of DS-VGO was lower as compared to that of the catalyst based on USY zeolite. However, the gas yield was lower in case of mesoporous materials based catalysts. Introduction Zeolites are widely used as catalysts in petroleum refining and for the production of petrochemicals and fine chemicals. Recently, the breakthrough discovery of the M41S family mesoporous materials [1,2] exemplified by the MCM-41 bearing hexagonal-close-packed channels. Despite the excellent structural properties, the hydrothermal stability of MCM-41 and MCM-41-like mesoporous materials was reported as lower than their counter part zeolites. Recently, a new kind of mesoporous silica, SBA-15, has been synthesized with poly (alkylene oxide) triblock copolymers such as poly (ethylene oxide)-poly (propylene oxide)poly (ethylene oxide) (PEO-PPO-PEO) [3]. Beside its uniform and large pore size channels (4.6-30 nm), SBA-15 possesses thick walls (3.1-6.4 nm). Therefore, it has much higher hydrothermal stability than MCM-41 [3]. Owing to their extremely large surface area (generally exceeding 1000 mg) and ultra large pore size these mesoporous materials have attracted great practical and academic interest as acid-catalyzed reactions of large molecules such as hydroprocessing of residual oil [4-5]. In this study, the preparation of MCM-41 and SBA-15 with Si/Al 10, 20 and hydrocracking catalysts based on these mesoporous materials along with USY zeolite are presented. Commercial USY zeolite used in this study also has mesopores in it. Nickel and molybdenum are impregnated as active metals. Mesoporous materials and hydrocracking catalysts prepared were characterized by XRD, surface are, pore volume, pore-size distribution, particle size measurement, and acidity measurement by FTIR and ammonia TPD. The side crushing strength of the extrudates with alumina binder was also measured by crushing strength tester. The catalysts were evaluated for hydrocracking of desulfurized vacuum gas oil (DS-VGO). The hydrocracking activity was measured by GC-SIMDIST method and sulfur and nitrogen contents of the product were measured by elemental analyzer.

Mesoporous Alumina Molecular Sieves: Characterization and Catalytic Activity in Hydrolysis of Carbon Disulfide

Synthesis and Characterization of Al-Msu-S Mesoporous and Meso-Microporous Molecular Sieves and Their Catalytic Performance

The Synthesis of Al-MSU-S-Y and Its Catalytic Activity on the Synthesis of Acetals and Ketals

Catalytic activities and properties of AlHMS mesoporous molecular sieves

Synthesis, Characterization and Catalytic Applications of Mesoporous Γ-Alumina from Boehmite Sol

Catalysts of Ordered Mesoporous Alumina with a Large Pore Size for Low-Temperature Hydrolysis of Carbonyl Sulfide

Spindle-shaped nanoclusters self-assembled into bayberry-like hollow alumina microspheres for efficient catalytic hydrogenation of CS2 to CH3SH

Synthesis of hydrothermally stable, hierarchically mesoporous aluminosilicate Al-SBA-1 and their catalytic properties

Synthesis and Catalytic Performances of Mesoporous Aluminosilicates of Cubic and Hexagonal Structure with Stronger Acid Sites

Direct Synthesis of Alsba Mesoporous Molecular Sieves: Characterization and Catalytic Activities

Catalytic activities and properties of mesoporous sulfated Al 2 O 3 –ZrO 2

Catalytic Activities and Properties of Mesoporous Sulfated Al2O3–ZrO2

Synthesis and characterization of mesoporous aluminosilicate molecular sieve from K-feldspar

Effect of Si/Al Ratio of Mesoporous Support on the Structure Evolution and Catalytic Performance of the Cu/Al-HMS Catalyst

Nanosized titania and zirconia as catalysts for hydrolysis of carbon disulfide

The Morphologically Controlled Synthesis and Application of Mesoporous Alumina Spheres

Promoting Effect of Surface Acidities on Efficiency of Copper Modifier for Ordered Mesoporous Carbon-Sio2-Al2o3 Nanocomposites in Adsorptive Desulfurization

Mechanism of Heterogeneous Oxidation of Carbonyl Sulfide on Al2O3: an in Situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy Investigation.

Synthesis and Characterization of Mesoporous Al-SBA-15

Low-temperature hydrolysis of carbonyl sulfide in blast furnace gas using Al2O3-based catalysts with high oxidation resistance

Synthesis and Catalytic Evaluation of Mesoporous Molecular Sieve Supported Hydrocracking Catalysts