Abstract:Multi-needle water bath electrospinning is one of the most efficient methods to prepare micro-nano fiber composite yarns. The nanofiber structure can be targeted regulated to obtain high performance composite yarns. In order to explore the effect of receiving distance on the structure and properties of micro-nano fiber composite yarns, polyacrylonitrile nanofibers were uniformly coated on silver-coated nylon yarn by four-needle continuous water bath electrospinning method. The electric field distribution at different receiving distances was simulated by ANSYS finite element analysis software, and the effect of electric field distribution on the structure and properties of micro-nano fiber composite yarns were studied. The results indicated that the peak electric field intensity appeared at the tip of the needles and decreased with the increase of receiving distance. The receiving distance was constant, the field intensity was lower when the direction of the centerline of the needle tip was farther away from the tip, but the field intensity at the conductive core yarn was higher than that in the surrounding area (small spikes). The average field intensity of small spikes at 180 mm was only 1/4 of that at 80 mm. When the receiving distance increased within a certain range (100~140 mm), the nanofibers had smooth surface and good separation, nanofibers diameter decreased continuously, and the porosity changed inversely. With the further increase of the receiving distance, the nanofibers gradually bonded, the nanofibers diameter increased, and the porosity changed oppositely. The coating rate of nanofibers showed a decreasing trend, and the mechanical properties of micro-nano composite yarns were improved. When the receiving distance was 100 mm, the porosity reached 38.94%, the breaking force, breaking elongation and breaking strength were 13.71±1.36 cN, 22.76±6.62% and 0.15±0.02 cN·dtex-1, respectively. Considering all factors, the receiving distance of 100 mm is appropriate.

Configuration of Electrospun Polycaprolactam Nano-Scale Fibers

Effects of Electrospinning Technological Parameters on Diameter of Polyacrylonitrile Insulation Nano-fiber

Preparation and Properties of Poly (vinyl Alcohol) Nanofibers by Electrospinning

A study on the preparation of lignin-based nanofibers by electrospinning

Preparation and characterization of pan nanofiber via electrostatic spinning

Coaxial Electrospinning Of Polyurethane(Shell)/Nylon-6(Core) For Textile Applications

Comparative Study of Electrospinning Parameters for Production of Polylactic Acid and Polycaprolactone Nanofibers Based on Design of Experiment

Electrospinning of Nylon-6,66,1010 Terpolymer

Electrospinning of Silver/Sodium Alginate/Poly(vinyl Alcohol) Fibers

Electrospinning of polymer nanofibers with ordered patterns and architectures.

Experimental Investigation of the Effect of Processing Parameters on the Formation of Electrospun Polyethylene Oxide Nanofibers

Fabrication of Poly(vinylidenefluoride‐co‐hexafluoropropylene) Nanofiber Yarns by Conjugate Electrospinning

Electrospinning process of poly(ether sulfone) fibers

Effects of Six Processing Parameters on the Size of PCL Fibers Prepared by Melt Electrospinning Writing

Electrospun Polyacrylonitrile nanofiber yarn prepared by funnel-shape collector

Mechanical Properties of Nylon-6/Sio2 Nanofibers Prepared by Electrospinning

Assembly of Oriented Ultrafine Polymer Fibers by Centrifugal Electrospinning

Influence of Electrospinning Parameters on the Morphologies of Polyvinyl Acetate Fibers

Electrospinning of Epoxy Resin

Electric field simulation of multi-needle water bath electrospinning and structural properties of SCN/PAN micro-nano fiber composite yarns

Synthesis of copolymers of ε-caprolactone and L-lactide and a preliminary study on their electrospinning process