Abstract:The poly(vinylidene fluoride) (PVDF) as-spun fibers with different spin-stretching ratios were fabricated via melt-spinning method using plunger spinning machine. PVDF fibers with different post-stretching ratios were subsequently obtained by post-stretching method under the thermal treatment condition. The crystal and orientation structure of the fibers were investigated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and so on. The results indicated the orientation of alpha crystal and macromolecular increased with the increasing spin-stretching ratio. Furthermore, as the higher spinstretching ratio increased, the degree of crystallinity of as-spun fiber was prone to perfection. Furthermore, according to the POM photomicrograph, the horizon of extinction position was almost entirely black, and the horizon of diagonal position was getting brighter, due to the increase of the anisotropy of as-spun fibers. This was attributed that the irregular fiber macromolecules were stretched to regular structure. When spin-stretching ratio was 330, the crystallinity of as-spun fiber could reach 56.38% and the orientation factor of alpha(110/200) crystal plane was up to 0.89. In terms of post-stretching technique, the stretching ratios had no significant influence on the degree of crystallinity However, the post-stretching process played a positive role in the transition of the crystal phase from alpha to beta. The molecular chains of the fibers are easier to slip and arrange regularly along the fiber axis during spin-stretching process. The conformation was easier to transfer from alpha phase to beta phase owing to the segmental motion of molecular chains during post-stretching process. Especially, the orientation of beta crystal was also improved at the same time. Specially, when the post-stretching was up to the stage of uniform reduction of fiber diameter, the orientation of beta crystal retained a high level. When post-stretching ratio was 11, the content of beta crystal could account for 82.85% and the orientation factor of beta(110/200) crystal plane was up to 0.83.

Study on the Supramolecular Structure and Fiber Morphology During Pressing Process

Experimental Studies on Chopping Cotton Stalk when Compressed to High Densities

Rheological properties and calorimetric analysis on zein under high pressure treatment

Effects of Wet-Pressing Induced Fiber Hornification on Hydrogen Bonds of Cellulose and on Properties of Eucalyptus Paper Sheets

Effects of stretching on crystalline phase structure and morphology of hard elastic PVDF fibers

Influence of pressing and drying on the microstructure of recycled plant fibers

The Obstacle Mechanism of Fiber Hydrolysis Saccharification During Pressing and Drying Process

Toward high-performance poly(para-phenylene terephthalamide) (PPTA)-based composite paper via hot-pressing: the key role of partial fibrillation and surface activation

Effects of Pressing and Drying on the Cellulase Crystalline Degree of Recycled Fiber

Effect of Pressure of Supercritical Carbon Dioxide on Morphology of Wool Fibers During Dyeing Process

Effects of High-Pressure Homogenization on Physical and Thermal Properties of Citrus Fiber

Effect of Hot-Pressing Process on Mechanical Properties of UHMWPE Fiber Non-Woven Fabrics

Comprehensive research on the correlation between microstructure and mechanical properties of polyacrylonitrile‐based precursor fibers prepared by wet‐spinning

Crystalline Structure Changes of Poly(vinylidene fluoride) Fibers during Stretching Process

Effects of Drying on the Microstructure and Hornification Secondary Fibers Fibers

Effect of Hot Pressing on Strength Properties of PPTA Paper

Effect of Pressurized Hydrothermal Treatment on the Properties of Cellulose Amorphous Region Based on Molecular Dynamics Simulation

Influence of Processing Temperatures on Fiber Dimensions and Microstructure of Polypropylene/hemp Fiber Composites

Experimental and theoretical investigation of the fluid behavior during polymeric fiber formation with and without pressure

The Influence of Drawing Pressure on the Properties of Pet/Pa6 Bicomponent Spunbonded Fibers

Microstructural Evolution during Dry-Jet Wet Spinning Postprocessing from Coagulation Bath Fiber to High-Performance Polyacrylonitrile Precursor Fiber