Abstract:Along with the need for western economic development, the number of long tunnel projects which go through mountains is constantly on the rise. In the process of construction, various disaster-causing structures are frequently exposed, which leads to many geological disasters. The traditional idea is that the reverse fault is not easily developed for an underground river, which means that the tunnel elevation design is not considered adequately. When some tunnels cross the bottom of the river, the fractures near the fault between the underground river and the excavation space may be activated and then evolve into channels, causing serious water inrush accidents during construction and operation processes. Taking the Qiyueshan Tunnel site as an example, on the premise of the anatomy of the control mechanism of the reverse fault on the development of the underground river, based on the multiperiod typical structural traces of the tunnel and surface outcrop, it was found that stratifications, dip joints, transverse joints, and tension joints of good aperture grade are important control factors. The cut block easily loses its stability and provides space for karst development, while intermittent uplifting of regional structures provides hydrodynamic conditions for the development of the underground river, causing the hydraulic gradient to be inconsistent in the overall underground river. Finally, the rainwater dynamic monitoring and tracer connectivity are data that can be fully utilized to demonstrate that a reverse fracture can control the development of the underground river. The authors further considered the effect of the vertical zoning of the fault structure and the excavation disturbance, and, drawing on the experience of the relative location of the same site in the same field, put forward the suggestion that the construction of the follow-up tunnel in the study area should be slightly higher than the elevation of the underground river. The research results can provide useful reference for similar engineering problems in the future.

On the seepage governing technology of mining method tunnel in the watery section

Key techniques and important issues for slurry shield under-passing embankments: A case study of Hangzhou Qiantang River Tunnel

Surface Settlements Induced by Tunneling in Permeable Strata: a Case History of Shenzhen Metro

The crucial techniques of water leakage treatment in operating highway tunnel

RESEARCH ON THE SEEPAGE FIELD OF EXCAVATION WITH WATERPROOF STRUCTURE

Study on the Control of Underground Rivers by Reverse Faults in Tunnel Site and Selection of Tunnel Elevation

A REVIEW OF THE CAUSES AND HAZARDS OF SHIELD TUNNEL LEAKAGE

Analytical solutions for seepage fields of underwater tunnels with arbitrary burial depth

Analytical Solutions for Seepage Field of Underwater Tunnel

Analytical Solutions of Steady a Seepage Field for Deep-Buried Tunnel with Grouting Ring Considering Anisotropic Flow

Prevention of the Water Penetration and Water Leakage of the Tunnel

Semi analytical Solutions on Seepage Field of Twin Tunnels

Introduction of Construction Process in Shenjiamen Immerse Tube Tunnel and Problem Analysis of Grouting

Analysis of Settlement Control Measures in Immersed Tunnel

Research on the Technique of Water Leakage Controlling of G210 Nanshanmao Tunnel

STUDY ON 3D PHYSICAL MODEL TEST OF SEEPAGE OF DEEP-BURIED LONG AND LARGE DIVERSION TUNNEL

Research on the performance and application of waterproofing materials in tunnel engineering

Study on the Stability and Seepage Characteristics of Underwater Shield Tunnels under High Water Pressure Seepage

Discussion on Key Technologies and Countermeasures in Construction of Submarine Tunnel by Mining Method

Comprehensive Application of Borehole Fine Detection Methods: A Case Study in Shantou Bay Subsea Tunnel

Study of Seepage Generation Technology in Excavation Process Based on 3D Geo-Mechanical Model