Abstract:Along with the need for western economic development, the number of long tunnel projects which go through mountains is constantly on the rise. In the process of construction, various disaster-causing structures are frequently exposed, which leads to many geological disasters. The traditional idea is that the reverse fault is not easily developed for an underground river, which means that the tunnel elevation design is not considered adequately. When some tunnels cross the bottom of the river, the fractures near the fault between the underground river and the excavation space may be activated and then evolve into channels, causing serious water inrush accidents during construction and operation processes. Taking the Qiyueshan Tunnel site as an example, on the premise of the anatomy of the control mechanism of the reverse fault on the development of the underground river, based on the multiperiod typical structural traces of the tunnel and surface outcrop, it was found that stratifications, dip joints, transverse joints, and tension joints of good aperture grade are important control factors. The cut block easily loses its stability and provides space for karst development, while intermittent uplifting of regional structures provides hydrodynamic conditions for the development of the underground river, causing the hydraulic gradient to be inconsistent in the overall underground river. Finally, the rainwater dynamic monitoring and tracer connectivity are data that can be fully utilized to demonstrate that a reverse fracture can control the development of the underground river. The authors further considered the effect of the vertical zoning of the fault structure and the excavation disturbance, and, drawing on the experience of the relative location of the same site in the same field, put forward the suggestion that the construction of the follow-up tunnel in the study area should be slightly higher than the elevation of the underground river. The research results can provide useful reference for similar engineering problems in the future.

Discussion on Key Technologies and Countermeasures in Construction of Submarine Tunnel by Mining Method

Key techniques and important issues for slurry shield under-passing embankments: A case study of Hangzhou Qiantang River Tunnel

Analysis of Geologic and Seismologic Conditions of the Taiwan Strait Tunnel

Key Technologies of Shield Tunneling Machine and Present Status and Prospect of Test Rigs for Tunneling Simulation

Study on Method of GPR in Tunnel Engineering Detection

REVIEW OF GROUND PENETRATING SHIELD TUNNEL'S CONSTRUCTION TECHNICAL

Boring Technology and Practice for Small Section Tunnel under Complicated Geological Conditions

Challenge in Design and Construction of Submerged Floating Tunnel and State-Of-Art

Study on structural mechanical characteristics and safety warning of NATM tunnel in aquifer

Construction Technology and Development Tendency of Submerged Tubular Tunnel

The Waterproofing Keypoints and Weakpoints with Countermeasures in Laoshan Tunneling Engineering

Study on the Control of Underground Rivers by Reverse Faults in Tunnel Site and Selection of Tunnel Elevation

Overview of Tunnel Detection Technology

On the seepage governing technology of mining method tunnel in the watery section

Case Study of Rehabilitation of A Damaged Underwater Tunnel in the Construction Phase

Research on Key Technology of Mechanical Construction of Connecting Passages

Research on tubular segment design of submerged floating tunnel

Present Status and Prospect of the Study on Key Technologies of Tunnel Ahead and Station (shaft) Following Method

Some Key Problems Of High Performance Fiber Reinforced Concrete Submerged Floating Tunnel

Review of tunnels and tunnelling under unfavourable geological conditions

Introduction of Construction Process in Shenjiamen Immerse Tube Tunnel and Problem Analysis of Grouting