Abstract:In order to improve the accuracy of the analysis of the impact of freeze–thaw cycle on concrete durability in a salt freezing environment, the numerical simulation of the impact of the freeze–thaw cycle on concrete durability in a salt freezing erosion environment is studied in this paper. Firstly, considering the influence of axial force and bending moment on the relationship between bending moment and curvature, a concrete fiber beam column model is established. Then, according to the joint influence of temperature field, stress field and seepage field on concrete in the process of freezing and thawing, the control differential equation of the freezing and thawing cycle is established. The freeze–thaw damage section is divided, the non-uniform distribution of freeze–thaw damage is determined, and the division of the freeze–thaw damage section is completed. According to the linear relationship between freeze–thaw damage degree, relative dynamic elastic modulus, freeze–thaw cycle times and position variables, the durability of concrete is numerically simulated, and the attenuation law of bond strength at different section depths after freeze–thaw is determined. The results show that the temperature curve simulated by the design method is consistent with the actually measured temperature curve, which can better reduce the temperature change of the inner core of the test block during freezing and thawing, and the relative dynamic elastic modulus is in good agreement with the actual value, which can prove that the method in this paper has certain practical application value. It is expected to provide some reference for solving the durability problem of concrete in a salt frost erosion environment and the optimal design of concrete structures.

Predicting Method of Concrete Service Life Based on Damage Development Equation

Service Life Prediction of Precast Concrete Structures Exposed to Chloride Environment

Deterioration characteristics of the bond between reinforcement and concrete subjected to freezing-thawing cycles and steel corrosion

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Environmental Factors Influencing The Durability Of Concrete Structures In Frost Environments

Service Life Prediction of Concrete with Combined Air-Entraining Admixture and Fibers under Freeze–Thaw Cycles Based on Critical Water Saturation Theory

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Probabilistic Lifetime Assessment of Marine Reinforced Concrete with Steel Corrosion and Cover Cracking

A stochastic damage model for evaluating the internal deterioration of concrete due to freeze–thaw action

Prediction of Concrete Compressive Strength in Saline Soil Environments

The Model for Predicting the Remaining Service Life of Reinforced Concrete Bridges In-Service and Applicability

Life prediction method of concrete structures based on relativistic information entropy

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Data-Based Statistical Analysis of Laboratory Experiments on Concrete Frost Damage and Its Implications on Service Life Prediction

Numerical Simulation of the Effect of Freeze–Thaw Cycles on the Durability of Concrete in a Salt Frost Environment

RBSM based analysis on mechanical degradation of non-air entrained concrete under frost action – A general prediction with various water cement ratio, lowest temperatures and FTC numbers

Birnbaum-Saunders Durability Life Prediction Model of Site-Exposed Concrete in the Saline Soil Area

Deterioration of concrete under the coupling action of freeze–thaw cycles and salt solution erosion

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

A Numerical Study on Chloride Diffusion in Freeze-Thaw Affected Concrete

Degradation Law and Service Life Prediction Model of Tunnel Lining Concrete Suffered Combined Effects of Sulfate Attack and Drying–Wetting Cycles