Abstract:This work presents a novel method to acquire the effective convection heat transfer coefficients on the interfaces of wall-fluid contacts and sphere-fluid in both the near-wall region and core region of sphere-packed beds. Pore-scale numerical simulations are first conducted for different porosities pertaining to two regular body-centered cubic and face-centered cubic packings, packing lattice angles, inflow velocities, and ratios of the thermal conductivities of the solid and fluid. A finite-thickness metal reactor wall is included in the pore-scale simulation to make the heating boundary conditions more realistic. The outer surface of the metal wall is subjected to a uniform heat flux. The heat then passes through the metal wall and dispenses into the solid and liquid phases of the packed bed through the wall-sphere and the wall-fluid interfaces at the inner wall according to the physical mechanisms. Within the reactor, the heat transfer mechanism is separately considered in the near-wall region and the core region due to the intrinsic differences in the flow pattern. For each packing, different inflow angles are examined and exhibit different flow patterns and heat transfer performances. After the whole domain is hydrodynamically and thermally fully-developed, the local effective convection heat transfer coefficients can then be calculated. These coefficients reflect the realistic local convection either on the reactor wall or on the sphere-fluid interface. These convection heat transfer coefficients, along with the effective solid thermal conductivity through the contacting spheres obtained in our previous work, are implanted into a modified two-equation LTNE model. This modified LTNE model yields linear longitudinal fully-developed temperature distributions within the reactor having discrepancies in the temperature slopes less than ±10% from those by the pore-scale numerical simulations. In contrast, the conventional model even fails to reach linear distributions of the solid- and liquid-phase temperatures, which are expected for fully-developed packed-bed flows.

A Local Thermal Non-Equilibrium Analysis of Fully Developed Forced Convective Flow in a Tube Filled with a Porous Medium

Simulation And Analysis On Heat Transfer In Laminar Oscillatory Flow In-Tube

Analytical and Numerical Study on Thermally Developing Forced Convective Flow in a Channel Filled with a Highly Porous Medium Under Local Thermal Non-Equilibrium

Analysis of Thermally Developing Flow in Porous Media under Local Thermal Non-Equilibrium Conditions

Analysis of Error and Stability of Nanofluid over Horizontal Channel with Heat/Mass Transfer and Nonlinear Thermal Conductivity

Numerical Analysis of Mixed Convective Heat Transfer In a Square Channel with Uniform Wall Temperature.

Effect of Magnetic Field on the Developing Thermal Field in a Duct Filled with Porous Media under Local Thermal Non-Equilibrium with a Nonlinear Flow Model

Prediction of Forced Gas Flows in Circular Tubes at High Heat Fluxes Accompanied by Laminarization

NUMERICAL SIMULATION OF FORCED CONVECTION HEAT TRANSFER IN POROUS PLATE CHANNELS USING THERMAL EQUILIBRIUM AND NONTHERMAL EQUILIBRIUM MODELS

Heat and fluid flow analysis of metal foam embedded in a double-layered sinusoidal heat sink under local thermal non-equilibrium condition using nanofluid

Analytical and numerical investigation of heat transfer of porous fin in a local thermal non-equilibrium state

Analytical study of flow and heat transfer in an annular porous medium subject to asymmetrical heat fluxes

Thermal Boundary Conditions of Local Thermal Non-Equilibrium Model for Convection Heat Transfer in Porous Media

Thermal Circuit Modeling and Numerical Verification for Concurrent Fluid Flows through an Iso-Flux Heated Concentric Double Tube

Pore-scale numerical simulation and LTNE analysis for fully-developed forced convective heat transfer in packed beds of mono-sized rough spheres covering near-wall and core regions

Development and Assessment of an Isotropic Four-Equation Model for Heat Transfer of Low Prandtl Number Fluids

The nanofluid flows in the channel with linearly varying wall temperature

Natural convection due to lateral uniform heat flux in a slender porous cavity saturated with nanofluid: Departure from LTE state

Darcy-Forchheimer flow with viscoelastic Cattaneo-Christov heat flux model and nonlinear thermal radiation: A numerical investigation

Local thermal nonequilibrium perspective of heat transfer and fluid flow in a slender anisotropic porous cavity due to lateral uniform heat flux

Heat transfer in a MHD couple-stress fluid in a channel filled with porous material: A computational analysis