Abstract:For microelectronic industry, Cu-based substrate and epoxy molding compound (EMC) interface is inherently weak and most likely to delaminate, well-known as a major threat for integrated circuits (ICs) reliability. In this paper, hierarchical whisker-like oxide/Cu cone structure was for the first time to be fabricated by combining electroless plating with heat treatment methods to enhance the interface adhesion between Cu-based substrate and EMC. The surface morphology was characterized by scanning electron microscope (SEM). Result shows that the hierarchical whisker-like oxide/Cu cone film is fine, dense and uniform; Single Cu cone structure is about 3-5 μm in height and 1 μm in root diameter; a layer of whisker-like oxide grows perpendicularly to circular surface of Cu cone, with length ranging from tens to hundreds of nanometers. Adhesion strength between the as-prepared substrates and EMC were measured by button shear test. With consideration of oxidation caused by practical processes (e.g. wire bonding), the interface of EMC and porous oxide formed at 260°C for 5 min was taken as standard sample, representative of practical interface. To further study the effect of whisker-like oxide and Cu cone solely on adhesion performance, whisker-like oxide, porous oxide/Cu cone were investigated as well. Button shear test results reveal that interfacial adhesion strength of EMC and whisker-like oxide, porous oxide/Cu cone, hierarchical whisker-like oxide/Cu cone are 85%, 110% and 162% higher than that of standard interface. Moreover, the mechanism for adhesion improvement was discussed by facture surface observation, failure path assumption and force-displacement curve analysis. Results show that interface of EMC and hierarchical whisker-like oxide/Cu cone exhibits brittle/ductile property with about 3-5 μm thick EMC left on the fracture surface, indicating cohesive failure caused by remarkable mechanical interlocking effect. © 2011 Elsevier Ltd. All rights reserved.

Effect of Cu Lead-Frame Oxidation Time on Cu/EMC Interfaces in Power Devices

Adhesion improvement of Cu-based substrate and epoxy molding compound interface by hierarchical structure preparation

Study on Shear Strength and Jc of EMC/Cu Interface with Cu Oxidation and Moisture Absorption

Al-clad Cu Bond Wires for Power Electronics Packaging: Microstructure Evolution, Mechanical Performance, and Molecular Dynamics Simulation of Diffusion Behaviors

Oxidation failure mechanism of copper alloy lead frame for IC package

Oxidation Failure Of Lead Frame Copper Alloys With-Surface Electroplated Pure Cu

Effect of in-line electron beam treatment on the electrical performance of Cu/organic low-k damascene interconnects

The Status and Development of Oxidation of Copper Alloy for Lead Frame

The Effect Of Cu Orientation On Fracture Location In Cu3sn-Cu Interface Structure Under Monotonic Loading Condition By Molecular Dynamics Simulation

Understanding the Impact of Surface Engineering, Structure, and Design on Electromigration Through Monte Carlo Simulation and In‐Situ SEM Studies

Oxidation of Lead Frame Copper Alloys with Different Compositions and Its Effect on Oxide Film Adhesion

Effect of Ag on Oxidation of Cu-base Leadframe

The Effect of Pressure and Orientation on Cu-Cu3Sn Interface Reliability under Isothermal Ageing and Monotonic Traction Via Molecular Dynamics Investigation

Microstructure evolution in Cu-2.13Fe-0.026P (wt%): The contribution of texture intensity to residual stress variation

Enhanced shear strength and microstructure of Cu–Cu interconnection by low-temperature sintering of Cu nanoparticles

The effect of chemical species in the lead frame materials on the interface microstructure between copper alloys and SnPb solder

The Effect of Lead Frame Material on Interface Microstructure Between Copper Alloy and SnPb Solder

Effect of Impurity and Illumination on Copper Oxidation after Chemical Mechanical Polishing

Effect of bonding time on reliability of Cu/Sn-9Zn-30Cu/Cu solder joints for 3D packaging

Effects of hygrothermal ageing and thermal shock on reliability of interfacial adhesion between black oxide coated copper substrate and epoxy resin

Fatigue Crack Growth on the Interface of Copper and Epoxy Molding Compound under Mixed-Mode Loading