Abstract:In order to study the effect of polycarboxylate superplasticizer (PCE) on the microstructure and strength characteristics of tailings paste, a total of 6 tailings paste combinations including 2 cement-sand ratios (20%, 40%) and 3 water reducer dosages (0, 0.40%, 0.80%) were investigated based on the indoor microstructure test (porosity measurement, XRD test, and SEM observation) and mechanical properties method. The strength of test blocks at different ages was obtained by numerical simulation. The results showed that: 1) The water reducer can effectively reduce the porosity of the tailings paste, and the reduction effect was more significant in the condition of high cement-sand ratios. Meanwhile, high cement-sand ratio is conductive to generate more beneficial hydrates such as portlandite; 2) Compared with the significant effect of cementitious agent on the tensile strength σ t of the paste, the effect of water reducer on σ t is weak. Accordingly, the σ t of the tailings paste is much more sensitive to cementitious agent than water reduce; 3) SEM images show that the better ratio of slurry containing polycarboxylic acid superplasticizer has more C-S-H cementitious content, smaller pore size and shorter molecular chain between particles, indicating that the particles are more encapsulated and the early strength is improved. 4) The incorporation of water reducer enhancement was particularly significant under the condition of triaxial compression. However, the presence of water reducer did not change its deformation characteristics, when the confining pressure is low, the strain softening appears; and when the confining pressure is high, it transforms to strain hardening. The peak strain ε 0 and the confining pressure σ 3 had a linear relationship; 5) The strength of the paste was significantly affected by the confining pressure σ 3 under different conditions. The peak intensity σ 1 and the confining pressure σ 3 satisfied a linear relationship, while the residual strength σ r and the confining pressure σ 3 satisfied a quadratic polynomial fitting relationship. The strength parameters cohesion c and internal friction angle φ were both positively correlated with the water reducer dosage.

EXPERIMENTAL INVESTIGATION ABOUT THE NEOTYPE POLYCARBOXYLATE-BASED HARDENING ACCELERATING AND WATER REDUCING ADMIXTURE

Admixture in Concrete in the Machanism Research

Study on the Effect of Fly Ash and Polycarboxylic Acid Water Reducer on the Properties of Recycled Concrete

Experimental study on strength and abrasion-resistance enhancement admixture

Synergistic Effect of Polycarboxylate Superplasticizer with Different Accelerants

Study on the Influence of Early Strength Polycarboxylate Superplasticizer on Early Performance of Concrete

Effect of Functional Superplasticizers on Concrete Strength and Pore Structure

Exploration into Anticorrosive Property of Antirust Compound-Admixture

Optimal Design and Performance of Concrete with Function Component in Marine Environment

Influences Of Chemical Admixtures With Different Sizes On Pore Structure And Impermeability Of The Hardened Cement

Effect of functional chemical admixtures on the performance of cement asphalt mortar used in ballastless track

Investigation on the Effects of Shrinkage-Reducing-waterproofing Admixture on Concrete Dry-Shrinkage Property

Mix proportion optimization and early strength development in modified foam concrete: an experimental study

Synthesis and Performance of Polycarboxylate Superplasticizer with Viscosity-Reducing and Low-Shrinkage Properties for Fair-Faced Concrete

Mechanical properties and micro-structure analysis of concrete adding high performance composite cementious material

Study on the performance and synergistic mechanism of cement mortar reinforced with combined superabsorbent polymers and basalt fibers admixture

Experimental Research on the Microstructure and Strength Characteristics of Tailings Paste Containing Wate Reducer

Development of a Novel Double-Sulfate Composite Early Strength Agent to Improve the Hydration Hardening Properties of Portland Cement Paste

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

AN EXPERIMENTAL STUDY ON MAKING CEMENTING MATERIAL WITH RECYCLED POWDER AND STEEL SLAG

Evaluating the operational properties of concrete admixtures containing molecularly modified polycarboxylate superplasticizers