Abstract:Cement plays a crucial role in mortar composition, and its particles exhibit a strong tendency to flocculate when mixed with water. This flocculation necessitates the addition of substantial water to improve the workability of mortar or concrete. However, this extra water does not contribute to the hydration reaction, potentially weakening the mechanical properties of the mortar. The introduction of superplasticizers has addressed this issue by reducing the water demand. Nevertheless, a common practice in construction is to use a standard dosage of superplasticizers for the same type of cement, even when sourced from different cement factories, which may affect material performance. This study investigated the influence of varying superplasticizer dosages on Portland pozzolana cement from different Ethiopian cement factories, examining the morphological characteristics of masonry mortar. Specifically, it evaluated the impact on cracks, porosity, and surface structure across different curing ages, as well as assessed the mortar's physical and mechanical properties. Mortar samples prepared using cement from three factories, labeled A, B, and C, with constant cement‐to‐sand ratios of 1:3 and water‐to‐cement ratios of 0.5. Superplasticizer added in varying amounts 0%, 0.6%, 0.8%, and 1%. The morphological analysis conducted using a 3D optical surface profiler microscope at 1, 7, 21, and 28 days. Besides these standard physical and mechanical tests also performed on all samples. The results demonstrated that addition of superplasticizers significantly influenced the surface morphology of mortar samples. Mortars A and B exhibited denser structures with superplasticizer dosages 0.8% and 1%, respectively, whereas mortar C displayed a denser structure in its control state (without superplasticizer). The flexural and compressive strength tests also revealed notable differences. Sample A2 (0.8%) from group A, sample B3 (1%) from group B, and sample C0 (0%) from group C achieved the highest strength within their respective groups at 28 days. The findings suggest that it is essential to evaluate the specific properties of cement before applying a standardized superplasticizer dosage, as variations in cement production can significantly influence the performance of the mortar.

Synergistic Effect of Polycarboxylate Superplasticizer with Different Accelerants

The Synergy Effect of Limestone Powder and Mineral Admixtures on the Mechanical Property of Mortar

Properties and acceleration mechanism of cement mortar added with low alkaline liquid state setting accelerator

Effect of Functional Superplasticizers on Concrete Strength and Pore Structure

Accelerators for Shotcrete – Chemical Composition and Their Effects on Hydration, Microstructure and Properties of Cement-Based Materials

Synergistic Effect and Mechanism of Nano-C-S-H Seed and Calcium Sulfoaluminate Cement on the Early Mechanical Properties of Portland Cement

Research on the Working Performance and the Corresponding Mechanical Strength of Polyaluminum Sulfate Early Strength Alkali-Free Liquid Accelerator Matrix Cement

Influence of Accelerators on Cement Mortars Using Fluid Catalytic Cracking Catalyst Residue (FCC): Enhanced Mechanical Properties at Early Curing Ages

Effect of Accelerators on the Workability, Strength, and Microstructure of Ultra-High-Performance Concrete

Study on the performance and synergistic mechanism of cement mortar reinforced with combined superabsorbent polymers and basalt fibers admixture

Effects of compound activators on the early mechanical properties of cement mortar incorporating large volume of fly ash

Investigation on Hydration and Mechanical Properties of Mortar Containing Limestone Powder and Fly Ash Based on the Coupled Chemical–Thermal–Mechanical Method

Study on the Influence of Early Strength Polycarboxylate Superplasticizer on Early Performance of Concrete

Effect of New Hardening Accelerator on the Strength of Segment Concrete

Effects of Accelerators and Retarders in Early Strength Development of Concrete Based on Low-Temperature-Cured Ordinary Portland and Calcium Sulfoaluminate Cement Blends

The acceleration effect of nano C-S-H-PCE on the microstructure formation and evolution at early age of cement paste

Effect of Superplasticizer in Cement Type on Morphological Characteristics of Masonry Mortar

Accelerators for normal concrete: A critical review on hydration, microstructure and properties of cement-based materials

Effectiveness Assessment of Superplasticizer Admixtures: Case of Self-compacting Concrete Reinforced with Fine Mineral Fillers

EXPERIMENTAL INVESTIGATION ABOUT THE NEOTYPE POLYCARBOXYLATE-BASED HARDENING ACCELERATING AND WATER REDUCING ADMIXTURE

Retardation effect of PCE superplasticizers with different architectures and their impacts on early strength of cement mortar