Abstract:There is an urgent need in surface mount technology (SMT) for a nontoxic, reusable and low temperature bonding technique which can afford good mechanical support as well as electrical contact. Meanwhile in the nanotechnology, many excellent and unique structure-related properties such as the high mechanical strength, the high conductivity and the adhesion ability of gecko feet have been studied. Our lab proposes a new patterned structure of Au nanowire array named nanowire surface fastener (NSF), which cold bonding for surface mount technology can be realized at room temperature. Then various methods have been developed to fabricate nanowire, such as arc discharge, catalytic CVD growth and template synthesis, and so on. Among these methods, the template method has been widely used for preparing one-dimensional nanostructures such as metals, semiconductors, polymers, and other materials by electrochemical, electroless deposition or sol-gel technique. Especially anodic aluminum oxide template assisted way has attached considerable attention due to its unique structure properties, such as controllable pore diameter, extremely narrow pore size distribution with high densities, high aspect ratios, and ideally cylindrical pore shape. The well arranged porous anodic aluminum oxide membrane is fabricated from aluminum film by two steps zM oxalic acid electrolytes. The anodic aluminum oxide membrane was investigated for features such as pore size, interpore distance, and thickness by 40 V. It is important for fabrication of porous anodic aluminum oxide template to find out elimination of the barrier layer of oxide and the pore extending rate by 0.5 M phosphoric acid. Morphologies of surface of aluminum film between anodization process and the anodic aluminum oxide barrier layer was researched by using atomic force microscope and scanning electron microscope. Results showed that the anodic aluminum oxide having the same diameter of the pore and the well arranged pore array without branching channel was obtained. The diameter of the pore before the pore extending treatment is 42 nm and the diameter of the pore after the pore extending treatment for 30 minutes is 86 nm. It was found that the diameter of the pore increased per 15 nm by the pore extending treatment for 10 minutes. We fabricated the through-hole anodic aluminum oxide template and made Cu nanowire by the template of our own making. By using Cu nanowire, we try to produce nanowire surface fastener and evaluate its properties.

Template-based synthesis of carbon nanofibres and their field emission characteristics

In Situ Fabrication and Graphitization of Amorphous Carbon Nanowires and Their Electrical Properties

Field Emission from Dense, Sparse, and Patterned Arrays of Carbon Nanofibers

Synthesis and Characterizations of Amorphous Carbon Nanotubes by Pyrolysis of Ferrocene Confined Within Aam Templates

Field Emission Of Large-Area And Graphitized Carbon Nanotube Array On Anodic Aluminum Oxide Template

Nanoscale Carbon Tubules Deposited in Anodic Aluminium Oxide Template: a Study of Soft X-Ray Transmission

Fabrication of Anodic Aluminum Oxide Template and Cu Nanowire Surface Fastener

Field emission behavior of aligned carbon nanofiber arrays

Field Emission Property of Highly Ordered Monodispersed Carbon Nanotube Arrays

Fabrication and characterization of vertically aligned carbon nanotubes on silicon substrates using porous alumina nanotemplates.

Template Synthesis of High-Density Carbon Nanotube Arrays

Novel Nanostructured Carbon Nanotube Electron Sources

Controlled growth of carbon nanotubes in diameter and shape using template-synthesis method

The Preparation of Anodic Aluminum Oxide Ceramic Template and the Fabrication of Silver Nanowires

Template synthesis, characterization and magnetic property of Fe nanowires-filled amorphous carbon nanotubes array

Template-confined growth and structural characterization of amorphous carbon nanotubes

Synthesis and Characterisation of Ordered Arrays of Mesoporous Carbon Nanofibres

Quasi Two-Dimensional Carbon Nanobelts Synthesized Using a Template Method

Template-Based Synthesis and Magnetic Properties of Mn-Zn Ferrite Nanotube and Nanowire Arrays

Large-Scale and Selective Synthesis of Carbon Nanofiber Bundles, Curved Carbon Nanofibers and Helical Carbon Nanofibers.

Synthesis and Characterization of Graphite Nanofibers Deposited on Nickel Foams