Abstract:The synergistic preparation of aluminum silicate ceramic fibers from dust removal ash and fly ash is a newly developed process that achieves green and high added value treatment of solid waste. In this process, the centrifugal fiber forming method is used to treat molten slag to obtain aluminum silicate ceramic fibers. During the production process, the centrifugal roller, as a key component in fiber forming, is in long-term contact with high-temperature slag. The heat transfer between the two causes a huge temperature gradient inside the roller material, causing significant thermal stress inside the material, which has a significant impact on the stability of the centrifugal roller structure and its working condition. This article mainly conducts numerical simulation research on the heat transfer between the roller and the slag during the centrifugal fiber forming process, providing theoretical support for ensuring the structural stability of the roller and improving its service life. The research was carried out using the FLUENT module of the ANSYS software (V2021R1), and the heat transfer model of the slag and roller was established. The effects of the internal circulating water, different slag temperatures, different slag film widths, and different boundary layer thicknesses on the heat transfer of the roller were analyzed. The results show that the water temperature at the outlet is about 6 °C higher than that at the inlet on average; when the temperature of the slag increases by 1 °C, the temperature of the roller surface in contact with the slag increases by 0.91 °C; when the width of the slag on the roll surface is 11–17 mm and the slag thickness (boundary layer thickness) is less than 1 mm, it is beneficial for fiber production.

Numerical simulation on the rollers' temperature of ITER PF compaction machine

Compaction Pressure Distribution and Pressure Uniformity of Segmented Rollers for Automated Fiber Placement

Numerical Computation of Coupled Electromagnetic-Thermal Field in an Induction Edge Heater for the Hot Strip Mill

Numerical Simulation of the Eddy Current and Temperature Fields in the Edge Heating Hot Strip Mill

Numerical simulation of continuous hot rolling process for ultra-thick SiCp/2009Al composites plate

Numerical Simulation of Elastic Deformation of Roller Based on Thermo-Mechanical Coupling

Numerical Simulation of Plate Temperature Distribution During Hot Rolling

Numerical Simulation Research on the Temperature Field and Hot Roll Crown Model of Hot Continuous Rolling Mills

Numerical simulation on flow and heat transfer in twin roll strip casting and rolling molten pool with side dams vibrating

Numerical simulation method of submerged arc surfacing process of rollers

Numerical Simulation of ITER PF1 Coil Heating at VPI of Electrical Insulation

The application of computer simulation in the heat-treatment process of a large-scale bearing roller

Numerical Simulation of the Solidification Process of a Heavy Roll Stand for Temperature Field and Thermal Stress Field

Numerical Simulation of Heat Transfer of Roller Slag in Centrifugal Preparation of Inorganic Fiber

NUMERICAL SIMULATION ON HEATING PROCESSOF 9Cr2Mo COLD ROLLER

Temperature modeling and analysis of transfer bar using hot coil box technology

Numerical prediction of Joule heating effect in electric hot incremental sheet forming

Numerical Simulation of Cast-rolling Process for Copper-Aluminum Composite Plate

Three-dimensional Numerical Simulation of Temperature Field of Heat Treatment Furnaces

Numerical simulation of pc steel bar induction heating process