Abstract:This paper describes the phase growth of Sn-3.0Ag- 0.5Cu solder joints by mechanical cyclic loading. The objective of this paper is to clear the influence of temperature and strain to the phase growth. It is very important to evaluate the life time of crack initiation in Sn-3.0Ag-0.5Cu solder joints under thermal cycles. A mini-lap joint type shear specimen was used to evaluate the influence of temperature and strain on the phase growth of solder joints. The mechanical cyclic loading was carried out under a constant temperature condition. The phase growth of beta-Sn in the solder joint were observed by the scanning electron microscope (SEM). Moreover, a finite element analysis of Sn-3.0Ag-0.5Cu solder joints under mechanical cyclic loading was performed. The elastic-plastic- creep properties of Sn-3.0Ag-0.5Cu solder was considered in the analysis. The phase size of beta-Sn increases until some period but becomes constant after the period. The total phase size within the influence of both temperature and strain increase as number of loading cycles increasing. It is difficult to separate the phase size caused by strain from the total phase size, but it is found that the increment of the total phase size in solder joints is useful parameter to consider the phase growth process. In fatigue tests, the increment of the phase growth is affected by the loaded displacement amplitude and rate. The increment becomes larger as the displacement amplitude and rate become larger. In finite element analyses, the inelastic strain amplitude per one cycle, which occurred by displacement loading, depends on loaded displacement amplitude but doesn't depend on displacement rate. The ratio of the plastic strain to the creep strain is changed by loaded displacement rate. Comparing the test results and the analysis results, the phase growth parameter of Sn-3.0Ag-0.5Cu solder joints is good agreement with the creep strain. Therefore the phase growth parameter is the evaluation parameter corresponding to a creep strain.

Progress in Carbon Dioxide Capture from Flue Gas by Pressure Swing Adsorption

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Porous Adsorption Materials for Carbon Dioxide Capture in Industrial Flue Gas

Advances in Post‐Combustion CO 2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Recent Advances in Elevated-Temperature Pressure Swing Adsorption for Carbon Capture and Hydrogen Production

Recent Developments and Consideration Issues in Solid Adsorbents for CO 2 Capture from Flue Gas

Influence of temperature and strain on phase growth process in Sn-3.0Ag-0.5Cu solder joints

System And Processes Of Pre-Combustion Carbon Dioxide Capture And Separation

State-of-the-art in Applications of Pressure Swing Adsorption Technology

The Latest Advances in Carbon Dioxide Capture Technologies

Research Progress on CO2 Capture and Utilization Technology

Recent Progress on Porous Carbons for Carbon Capture

A comprehensive overview of carbon dioxide capture: From materials, methods to industrial status

Carbon Capture From Flue Gas and the Atmosphere: A Perspective

Progress in Post-Combustion Technology for Carbon Dioxide Capture

Carbon dioxide capture: prospects for new materials.

Research progress in CO2 capture technology

Sustainable CO2 management through integrated CO2 capture and conversion

Industrial carbon dioxide capture and utilization: state of the art and future challenges.