Abstract:This paper is concerned with the design of bracing systems for three-ribbed parabolic arch bridges against out-ofplane buckling. Typical bracing systems for the three-ribbed arch bridges include K-bracing system and X-bracing system as well as transverse bracing system. The buckling criterion of the braced funicular three-ribbed arch bridge is derived from an exact matrix stiffness method (MSM) with a 14 x 14 s-order element stiffness matrix of three-dimensional beam-column elements that allows for torsional and warping deformations. The lateral torsional buckling load and mode are given by the lowest eigenvalue and eigenvector associated with the assembled structural stability stiffness matrix. A comparison study between different bracing system configurations suggests that the three-ribbed arches with the integral K- or X-bracing system (a K/X-bracing across the three arch ribs) have lower lateral torsional buckling loads than their arch counterparts with the independent Kor X-bracing system (the adjacent arch ribs are connected by K/X-bracing respectively), because the latter ones could provide more restraint on the middle arch rib to avoid early lateral torsional instability. Further, a bracing utilization efficiency index (defined as the normalized buckling capacity over material usage for bracing system) is proposed to quantify the effect of bracing systems in improving the lateral torsional buckling capacity of arch bridges. Highly efficient bracing systems that maximize the lateral torsional buckling load of three-ribbed arch structures with the lowest bracing material usage are then recommended.

STRENGTH REQUIREMENTS ON KNEE-BRACES OF RAFTERS IN PORTAL FRAMES

Out-of-plane stability of simply supported beams with knee braces

Buckling of Flexural-Shear Bracing System and Its Braced Steel Frames

Design Requirements of Bracings in Two-Story Longitudinal Frames

Bracing Systems for Three-Ribbed Arch Bridges Against Out-of-plane Buckling

Critical load of frames with flexural-typed bracings and threshold stiffnesses for the bracings

Buckling of Frames Braced by Flexural Bracing

Analysis on Bearing Capacity of Rigid Frame Column when Horizontal Knee-braces at Ends of Crane Beams

The Stability of Weakly Braced Frames

Analytical Study On Buckling Restrained Braced Composite Frames

Lateral resistance of moment resisting-chevron braced frames with weak beams

Determination of buckling mode for elastic-plastic braced frames

Determination of Buckling Mode for Braced Elastic–plastic Frames

Behavior and Design Approach of Knee-Braced Frames

Stiffness and strength requirements for longitudinal bracings of industrial building

Seismic Behavior of Buckling Restrained Braced Composite Frames

Requirements for Longitudinal Bracings of Industrial Buildings under Horizontal and Vertical Loads

A simplified analysis on elastic plastic stability of flexural bracing-frame system

LATERAL RESISTANCE OF CHEVRON-BRACED FRAMES WITH WEAK BEAMS

Optimal design of steel buckling-restrained braces considering stiffness and strength requirements

A New Stiffness-Strength-relationship-based Design Approach for Global Buckling Prevention of Buckling-Restrained Braces