Abstract:This paper is concerned with the design of bracing systems for three-ribbed parabolic arch bridges against out-ofplane buckling. Typical bracing systems for the three-ribbed arch bridges include K-bracing system and X-bracing system as well as transverse bracing system. The buckling criterion of the braced funicular three-ribbed arch bridge is derived from an exact matrix stiffness method (MSM) with a 14 x 14 s-order element stiffness matrix of three-dimensional beam-column elements that allows for torsional and warping deformations. The lateral torsional buckling load and mode are given by the lowest eigenvalue and eigenvector associated with the assembled structural stability stiffness matrix. A comparison study between different bracing system configurations suggests that the three-ribbed arches with the integral K- or X-bracing system (a K/X-bracing across the three arch ribs) have lower lateral torsional buckling loads than their arch counterparts with the independent Kor X-bracing system (the adjacent arch ribs are connected by K/X-bracing respectively), because the latter ones could provide more restraint on the middle arch rib to avoid early lateral torsional instability. Further, a bracing utilization efficiency index (defined as the normalized buckling capacity over material usage for bracing system) is proposed to quantify the effect of bracing systems in improving the lateral torsional buckling capacity of arch bridges. Highly efficient bracing systems that maximize the lateral torsional buckling load of three-ribbed arch structures with the lowest bracing material usage are then recommended.

Stiffness and strength requirements for longitudinal bracings of industrial building

Requirements for Longitudinal Bracings of Industrial Buildings under Horizontal and Vertical Loads

Design Requirements of Bracings in Two-Story Longitudinal Frames

The stiffness and strength requirements for platform-beams in an industrial hall

Critical load of frames with flexural-typed bracings and threshold stiffnesses for the bracings

Buckling of Flexural-Shear Bracing System and Its Braced Steel Frames

The Stability of Weakly Braced Frames

Notional load approach for shear-type braced frames

Design of horizontal stiffeners for stiffened steel plate walls in compression

STRENGTH REQUIREMENTS ON KNEE-BRACES OF RAFTERS IN PORTAL FRAMES

A simplified analysis on elastic plastic stability of flexural bracing-frame system

NOTIONAL LOAD APPROACH FOR FLEXURAL BRACING-FRAME

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

Buckling of Frames Braced by Flexural Bracing

Residual Stiffness Assuring Stability of Steel Structures

LATERAL RESISTANCE OF CHEVRON-BRACED FRAMES WITH WEAK BEAMS

Bracing Systems for Three-Ribbed Arch Bridges Against Out-of-plane Buckling

Optimal Bracing System Design for Funicular Twin Arches Against Out-of-plane Buckling

Determination of buckling mode for elastic-plastic braced frames

Stability Analysis ofLong-span Crossed-arch Latticed Structure

Optimal design of steel buckling-restrained braces considering stiffness and strength requirements