Abstract:Directional solidification of A1-4.5Cu alloy refined by adding Al-5Ti-1B has been carried out to investigate the texture formation and grain boundary characteristic of the paramagnetic crystal under a high magnetic field. OM and EBSD were applied to analyze the microstructures solidified at different temperature gradients (G) and magnetic field intensities (B). The results show that at the temperature gradient of 27 K/cm; the orientations of fcc alpha-Al grains without magnetic field are random. However, as a high magnetic field is imposed, the easy magnetization axes < 310 > of the alpha-Al grains are aligned parallel to the direction of the magnetic field leading to < 310 > texture. Meanwhile, the ratio of coincidence site lattice (CSL) grain boundaries increases with the increment of magnetic field intensity and reaches its maximum value at 4 T, but decreases as the magnetic field enhances further. On the other hand, when the temperature gradient is elevated, columnar dendrite morphology is exhibited without magnetic field; while a 6 T high magnetic field is introduced, the columnar dendrites are broken and equiaxed grains of random orientations are obtained. The alignment behavior of the free crystals in melt could be attributed to the magnetic crystalline anisotropy of alpha-Al. Moreover, the influence of fluid flow on the texture formation and CSL grain boundary development under magnetic field is discussed. The absence of convection is benefit for grain reorientation and CSL boundary formation. The application of high static magnetic field will inhibit the macro-scale convection. However, the interaction between thermoelectric current and magnetic field will cause micro-scale fluid flow, i.e., thermoelectric magnetic convection (TEMC). The TEMC will give rise to perturbation near the solid-liquid interface leading to the appearance of freckles as well as the decreasing of the ratio of CSL boundary. Moreover, it is proposed that the formation of CSL boundary is associated with the rotation of the free grains in melt along specific crystallographic axes by magnetic torque.

Slow cooling conditions for texturing ferromagnetic materials by solidification in a magnetic field

Study on the melt-textured technique in a magnetic field for giant magnetostrictive materials R–Fe alloy

Study on critical conditions of orientation for magnetic materials solidified in a magnetic field

Texture Evolution of Terfenol-D by Solidification in a Magnetic Field

Solidification of R-Fe Alloy in Magnetic Field

Magnetomechanical Behaviors of Giant Magneto Strictive Materials

〈100〉 Texture of DyFe_(1.9) Alloy Solidified in Magnetic Field

Tailoring coercive field in rare earth giant magnetostrictive materials by α-Fe precipitation

Texture Formation and Grain Boundary Characteristic of A1-4.5cu Alloys Directionally Solidified under High Magnetic Field

Optimization On Magnetic Transitions And Magnetostriction In Tbxdyyndz(Fe0.9co0.1)(1.93) Compounds

An Approach To The Bulk Textured Fe81ga19 Rods With Large Magnetostriction

Magnetomechanical damping capacity of (110) oriented Tb0.36Dy0.64 (Fe0.85Co0.15)2 alloy

The Inverse Magnetostrictive Effect in Tb-0.3 Dy-0.7 Fe-2

Anisotropic magnetostriction for Tb0.3Dy0.7Fe1.95 alloys under magnetomechanical loading

Influence of Tb on Easy Magnetization Direction and Magnetostriction of Ferromagnetic Laves Phase GdFe2 Compounds*

In-situ Studies of Low-Field Large Magnetostriction in Tb1−xDyxFe2 Compounds by Synchrotron-Based High-Energy X-Ray Diffraction

<i>In-situ</i> observation of magnetic vortices and their manipulation by external fields in Tb(Co<sub>1_x</sub>Fe<sub>x</sub>)<sub>5</sub> ribbons

Magnetocaloric Effect And Influence Of Fe/Cr Disorder On The Magnetization Reversal And Dielectric Relaxation In Rfe0.5cr0.5o3 Systems

Magnetostriction and Its Inverse Effect in Tb0.3Dy0.7Fe2 Alloy

Magnetic force microscopy study of heat-treated Fe81Ga19 with different cooling rates

Morphology evolution and enhanced magnetostriction of (Fe0.81Ga0.19)99.9Tb0.1 crystals prepared by liquid metal cooling Bridgman directional solidification