Influence of Ag Doping on the Microstructural, Optical, and Electrical Properties of ZrSiN Coatings Deposited through Pulsed-DC Reactive Magnetron Sputtering
Henry Samir Vanegas Parra,Sebastián Calderón Velasco,José Edgar Alfonso Orjuela,Jhon Jairo Olaya Florez,Sandra Carvalho
DOI: https://doi.org/10.3390/coatings13071154
IF: 3.236
2023-06-26
Coatings
Abstract:The functional properties of the transition-metal nitride coatings can be modified by adding noble metals such as silver. The incorporation of these elements has been demonstrated to be a good strategy for improving the electrical, optical, and mechanical responses of transition-metal nitride coatings. In this investigation, we report the production of Ag-ZrSiN coatings with varying silver atomic contents, deposited using pulsed-DC reactive magnetron sputtering. The effect of the incorporation of silver on the microstructure, the morphology, and the optical and electrical properties was investigated. The results revealed a nanocomposite structure of Ag-ZrSiN with nc-Ag/nc-ZrN embedded in an amorphous SiNx phase. The electrical resistivity decreased upon the incorporation of Ag from 77.99 Ω·cm to 0.71 Ω·cm for 0.0 and 12.0 at.% of Ag, respectively. A similar decreasing trend was observed in the transmittance spectra of the coatings as the silver content increased. For the Ag-ZrSiN coating, the transmittance values decreased within the wavelength range of 2500–630 nm and then remained constant down to 300 nm, at about 13.7%. Upon further increase of the silver concentration up to 12 at.%, the transmittance values continued to decrease between 2500 and 630 nm, reaching approximately zero at 630 nm, indicating that the coating becomes opaque within that spectral range.
materials science, multidisciplinary,physics, applied, coatings & films