Abstract:In this study, the potentiometric arrayed glucose biosensors, which were based on zinc oxide (ZnO) or aluminum-doped zinc oxide (AZO) sensing membranes, were fabricated by using screen-printing technology and a sputtering system, and graphene oxide (GO) and Nafion-glucose oxidase (GOx) were used to modify sensing membranes by using the drop-coating method. Next, the material properties were characterized by using a Raman spectrometer, a field-emission scanning electron microscope (FE-SEM), and a scanning probe microscope (SPM). The sensing characteristics of the glucose biosensors were measured by using the voltage-time (V-T) measurement system. Finally, electrochemical impedance spectroscopy (EIS) was conducted to analyze their charge transfer abilities. The results indicated that the average sensitivity of the glucose biosensor based on Nafion-GOx/GO/AZO was apparently higher than that of the glucose biosensor based on Nafion-GOx/GO/ZnO. In addition, the glucose biosensor based on Nafion-GOx/GO/AZO exhibited an excellent average sensitivity of 15.44 mV/mM and linearity of 0.997 over a narrow range of glucose concentration range, a response time of 26 s, a limit of detection (LOD) of 1.89 mM, and good reproducibility. In terms of the reversibility and stability, the hysteresis voltages (VH) were 3.96 mV and 2.42 mV. Additionally, the glucose biosensor also showed good anti-inference ability and reproducibility. According to these results, it is demonstrated that AZO is a promising material, which could be used to develop a reliable, simple, and low-cost potentiometric glucose biosensor.

A rapid response time and highly sensitive amperometric glucose biosensor based on ZnO nanorod via citric acid-assisted annealing route

An Amperometric Glucose Biosensor Based on the Immobilization of Glucose Oxidase on the ZnO Nanotubes

A Single Zno Nanofiber-Based Highly Sensitive Amperometric Glucose Biosensor

Glucose biosensors based on nano-composites of multi-walled carbon nanotubes and zinc oxide nanorods

Bio-inspired Formation of Mesoporous LiNbO3 Nanotubes and Application for Glucose Biosensor

Synthesis of ZnO Nanobundles Via Sol–Gel Route and Application to Glucose Biosensor

Non-enzymatic glucose sensing using hydrothermally grown ZnO nanorods: sensitivity augmentation by carbon doping and carbon functionalization

Room temperature ultrafast synthesis of zinc oxide nanomaterials via hydride generation for non-enzymatic glucose detection

Nano nickel oxide modified non-enzymatic glucose sensors with enhanced sensitivity through an electrochemical process strategy at high potential

Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

Glucose biosensor based on functionalized ZnO nanowire/graphite films dispersed on a Pt electrode

Preparation of magnetic Fe 3 O 4 /PPy@ZIF-8 nanocomposite for glucose oxidase immobilization and used as glucose electrochemical biosensor

Electrospun Porous ZnO Nanofibers for Glucose Biosensors

Improved Non-enzymatic Glucose Sensors of ZnO Nanorods by Adsorb Pt Nanoparticles

Glucose Oxidase/Nano-ZnO/Thin Film Deposit FTO as an Innovative Clinical Transducer: A Sensitive Glucose Biosensor

Amperometric biosensors based on carbon paste electrodes modified with nanostructured mixed-valence manganese oxides and glucose oxidase.

Bird nest-like zinc oxide nanostructures for sensitive electrochemical glucose biosensor

A Facile Fabrication of a Potentiometric Arrayed Glucose Biosensor Based on Nafion-GOx/GO/AZO

The Application of Complex Multiple Forklike ZnO Nanostructures to Rapid and Ultrahigh Sensitive Hydrogen Peroxide Biosensors

Amperometric glucose sensor based on catalytic reduction of dissolved oxygen at soluble carbon nanofiber.

ZnO nanorods anchored on CNTs incorporating carbon cloth flexible electrode as a highly sensitive electrochemical sensor